HELP-130/150 130/150W CO2 laser power supply

Quick Detail

Package & Delivery Lead Time

Detailed Description

HELP-130/150 130/150W CO2 laser power supply 1.Main features: 1.High output voltage and current: When imputing AC220V and outputting current up to 38MA, the voltage can be up to 25KV. 2.Response time: ≤ 1Ms ( from the time that switch signal is given to the output current up to 90% of the setting current ) 3.Increase the power of laser: The peak of laser power can be up to 150W and the average power is 130W. 4.Dramatically lengthen the service of laser. 5.Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 6.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 7.The power supply has the function of open circuit protection: Under the condition of good protective earth, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of the laser tube, thereby enhance the life of power supply. 8.The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 9.The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 10.Application: Cutting of thick acrylic, wood and so on. 2.Specification: Input Input voltage AC220V or AC110V AC frequency 47-440HZ Cold surge current ≤ 60A (AC220V Input) ≤30A (AC110V Input) Current leakage ≤0.7MA (AC220V Input) ≤0.4MA (AC110V Input) Output Maximum Input Voltage DC50KV Maximum Output Current DC38MA Efficiency ≥ 90% (Full load) Mean time between failure ≥1000H Response speed ≤1 ms (from the switch signal is given to the output current up to 90% of the setting current) Control interface TTL level switch control, high or low effective level can be chosen (details refer to the control terminal specification) Pressure-proof Input-Output, Input-Shell: AC1500V 10MA 60S, Output negative is connected with machine shell. Protection Can work in open-circuit condition for a short time ( Require a good protective earth and avoid arc between the positive and machine shell) Environment Operating temperature: -30C- +65C, Relative Humidity (RH): ≤ 90% Cooling way Force-Air Cooling (FAC) Dimension L×W×H=325×240×95(mm)

Basic Company Information

Hsu Electric Group

Company Advantage

Detail Company Introduction