HELP-100 100W CO2 Laser Power Supply

Quick Detail

Package & Delivery Lead Time

Detailed Description

HELP-100 100W CO2 Laser Power Supply 1.Main features: 1.Main features: 1. High output voltage and high output current: When inputting AC220V and outputting current up to 38mA, the voltage can be up to 25KV. 2. Fast response speed: It can observably enlarge laser power and prolong laser tube's service life. 3. Easy Control: The start and stop of laser can be easily controlled by TTL level. 4. The power supply has output open circuit protection. 5. This power supply has TTL signal indication, water Through signal indication and laser output indication. 6. This power supply has the BUTTON to test it work properly 7. Application: Cut thick acrylic and fabric. 2.Specification: AC Input Voltage AC220V or AC110V DC Input Voltage DC300V or DC150V AC Input Frequency 47~440Hz Voltage Output 50KV Maximum Current 38mA (depending on the laser tubes of different manufacturers) Efficiency 91% Overcurrent Protection 130% of maximum current Open Circuit Protection Yes (short term) Structure Fan cooling High Electric Level Control Voltage Range ≥ 3V Low Electric Level Control Voltage Range ≤ 0.8V Working Temperature -30° C~+65° C Relative Humidity 20~85%RH(no condensation) Voltage Resistance Input— Output AC1500V1minutes≤ 10mA Input— Shell AC1500V1 minutes≤ 10mA Output— Shell Connection Insulation Resistance ≥ 50MΩ (DC500V) Earth Leakage Current ≤ 1mA(AC220V)≤ 0.5 mA(AC110V) Vibration Resistance Amplitude: 0.5mm frequency 10~55Hz3 dimensional direction 2 hours MTBF ≥ 30, 000hours Test Time at Full Load and 60° C 12 hours Power Supply Switch Test within 7 Seconds 500 times Maximum Dimensions (L×W×H) 350mm×220mm×95mm

Basic Company Information

Hsu Electric Group

Company Advantage

Detail Company Introduction