Quick Detail
Place of Origin
HS-CODE
38-
Package & Delivery Lead Time
Detailed Description
Outline:
Punch lubricant particles,it does not contain sub-containing graphite and graphite.Product particle size is divided into:Ф1.0~1.5mm,Ф1.5~2.0mm,Ф2.0~3.0mm,the injection sleeve and it Plunger top melting and rapid expansion through its excellent capillary effect in the injection sleeve to form a lubricating film with excellent performance.It is easy to use without a traditional oil-based or water-based products used in dispensing pump-spray system.
Advantage:
1, no general pollution generated by oil lubricant;
2, reduce the incidence of casting porosity;
3, to extend the plunger tube life, reduce adverse effects due to friction;
4, with a punch to the die casting plant life, usually with pure oil lubrication than tripled;
5, increase injection speed;
6, casting particles completely consumed, no oil pollution;
7, no oil marks casting surface, the surface clean and bright;
8, pouring mouth, flow, soup cake recycling used, no grease, smoke, air pollution;
9, do not waste water, without water cooling system and cleaning the injection head;
10, the amount of a province, can achieve cost savings;
11, to improve process safety;
12, to maintain plant, ceilings, floors clean, green environmental protection in line with modern requirements.
Instructions for use:
Transmitter will be joined by particle particles pouring RoomUse of the punch diameter for different60mm0.4-0.5g80mm0.6-0.8g100mm1.0-1.3g140mm1.7-2.5g>150mm2.2-4.0gUsed to determine the amount depends on the casting weight to be triedby the experience.