M2M GSM Remote Terminal Unit

Quick Detail

Package & Delivery Lead Time

Detailed Description

RTU is a kind of SMS alert device for remote control system Adopts industrial GSM module and high performance 32 bits processor Only need to connect it with monitoring sensor terminal and electrical equipments Users can realize some remote control functions, such as remotely control and data measure for terminal equipments, equipment fault alarming and more This system in based on the monitoring, measuring and alarming for SMS It make PC mobile link with distance measuring equipment to remotely collect and monitor data via mobile communication technology Users can use mobile to check meter and monitor measuring equipments at any time and any place Remote data, alarming and state information can be send to many remote places for synchronous display Key features: 4 analog signal (4 to 20mA) inputs One voltage measurement port Reliable performance with built-in double watchdog Can be operated from anywhere and no distance limit Two-way voice communication by external microphone and speaker Automatic device condition report through SMS every 24 hour interval Supports armed/disarmed, inquiry status, switch on or off relay output by SMS commands User defined alarm condition (normally close or open), alarm and recovery SMS message for each alarm point One maximum of 8 mobile phone numbers can be programmable Can be set up and programmed from PC programmer by USB cable Specifications: DC power supply: 9 to 28V DC (standard adapter: 12V DC/1.5A) Power consumption: 12V input (maximum) at 150mA/50mA (average) Frequency range: quad band 900/1800/850/1900MHz Antenna: 50Ω SMA antenna interface Temperature range: -30 to 70°C Humidity range: relative humidity 95% Digital inputs: 12 digital input (dry contacts, NC,NO) 6 built-in relay outputs (12V) at drive electricity <10.0A Serial: USB Exterior dimensions: 147 x 65 x 95mm

Basic Company Information

Shenzhen Peakeon Technology Limited

Company Advantage

Detail Company Introduction