Bottom Loading And Bottom Discharging Flexitank

본문 바로가기


Home > Product > Bottom Loading And Bottom Discharging Flexitank
Product
Bottom Loading And Bottom Discharging Flexitank
Posting date : Feb 18, 2013
Membership
Free Member Scince Aug 29, 2011
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
S12-
Package & Delivery Lead Time
Detailed Description
Three-layer flexitank of Tongshuai is composed of two layer PE inner film which thickness is 0.35mm and coating PP woven fabric of high strength and wear-resistance. It is one-off transportation packaging which specially used in standard container. It is one of the innovative packaging products for non-hazardous liquid transportation by highway, railway and ocean shipping. —Flexitanks which is one economical Packing solutions for liquid products. —Flexitanks to suit 20' and 40' containers. —20 ft. Container payload 15% higher than IBCs —20 ft. Container payload 44% higher than drums —Low weight of Flexitank - so higher payloads possible —Food grade & High safety: FDA, EC, CIQ, HACCP, ISO9001, ISO22000, —with special design: Bonnet, anti-suction Valve, etc —Main composition: inner layers PE( food grade, 2*0.35mm)+ 1 outer layer PP(with high tensile strength, wearable) + valve+ Bonnet —Capacity ranges from 16,000to 24,000 liters, suits for 20ft container Bottom loading and bottom discharging flexitank It is composed of two layer PE inner film which thickness is 0.35mm and single coating PP woven fabric of 220g/㎡ high strength and wear-resistance. Tongshuai flexitank’s capacity is ranging from 16 to 24 stere ( We will select most suitable and safe capacity according to your shipping cargo). There is a feeding and discharging valve which specification is 2” ball valve or 3”butterfly valve on the flexitank bottom. Accessories: 1.bulk head 2.steel bar 5pcs/set 3.corrugated paper one roll/set 4.exhaust valve (for optional) There is a exhaust valve on the top of flexitank. The exhaust valve will avoid the problem of flexitank can’t be filled because of too much air. And the valve can exhaust air produced during loading at any time. 5.heating pad (for optional) At low temperature.product of high melting point would become sticky and is not easy to discharge, therefore when transporting at low-temperature ,we suggest to install a heating pad to solve the problem. We put one heating pad on the bottom of the container when install flexitank, and heat the product with steam and hot water (that is inside of heating pad) before unloading, which would make discharge easier.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top