Low VOC Silicone modified PU

본문 바로가기


Home > Product > Low VOC Silicone modified PU
Product
Low VOC Silicone modified PU
Posting date : Sep 01, 2011
Membership
Free Member Scince Aug 25, 2011
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
95-
Package & Delivery Lead Time
Detailed Description
Low VOC Silicone modified PU Nalstane Low VOC Silicone modified PU (SiPU) is based on a brand new technology, silicon modified functions on PU backbone imparts sports coatings the high performances of good adhesive onto concrete substrate, long life flexibility, weatherable, low VOC, simple for installation and maintenance, It’s a revolutionary innovation. Nalstane Low VOC Silicone modified PU (SiPU) flooring system are compounded with the primer coating, patching filler,elastic filler for expansion joint, elastic layer and surface layer, can directly knife coating onto substrate. Adjust thickness of elastic layer to achieve targeted coating thickness. Organic silicon function imparts excellent elasticity, hydrophobic, Breathable, excellent adhesion to the cement and asphalt substrate; the dry films gives excellent weatherability and water proofing, easy for installation. Application scope: Ideal for indoor & outdoor sports grounds, such as basketball, tennis, volleyball and badminton courts etc. Installation instructions 1. Mark out the construction scope 2. Water pounding to mark out pounding area, to fill pounding area with PU-M8 3. After substrate fully dry, apply A/B primer onto substrate by rolling, make sure the coating dried without surface sticky, this step may need 1-8hours. 4. Applying elastic layer (PU-M8) by knife coating, thickness is target at 2mm, allows one day for curing. 5. Water pounding to mark out pounding area, fill these pounding area with PU-M8, and allow 8-10hr for curing. 6. Applying elastic layer (PU-M8) by knife coating, thickness is target at 1mm, allows one day for curing. 7. Rolling coating of A/B primier onto cured elastic SiPU layers, allow 1-8 hrs for curing. 8. Mixing two package water based top coating well with skidding proofing fillers, knife coating/ rolling coating/ spray coating onto cured SiPU floor, allow curing for 1-3hrs 9. Mixing two package water based top coating well, knife coating/ rolling coating/ spray coating onto cured skidding proofing coating, allow curing for 1-3hrs 10. Line drawing. Special notes to Mixing: Any two package material should be mix uniformly according to the technical data sheet, only Tonwell certified thinner can be used in system. During stirring, pay attention to the drum bottom and walls. The mixed materials should be use up in 30-60minute, on condition of environmental temperature. Thickness should be no more than 3mm for each knife coating. Property index Hardness(Sal A): 55-77 Rebounce%:> 20% Recover from impact%:>95% Tensile Strength(Mpa): ≥1 Elongation on Breack%:>100% Anti-Flammable: 1 Abrasion resistance: <50 Friction Rate: 0.4-0.7 Wash fastness (5000r): no changing

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top