Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Features:
1, strong cohesive force, can be well attached to the wall and coating
2, the putty has certain penetrate ability, can close the pore on the surface and formulate a waterproof layer on the surface
3, good flexibility, can meet the requirement of elasticity modulus and keep the elastic coating and the base surface from easy peeling
4, good anti-crack function, can effectively prevent the bottom layer extend toward the surface
5, excellent anti-aging function and good anti-corrosion, non-toxic, harmless and environmental friendly product
Application:
This product is suitable for the surface system of requirements of primer and flexible waterproof coating systems and exterior insulation finish systems
Operation Process:
1, the ratio: 25kg powder + 2.5kg additive + appropriate water, 25kg powder + 10kg additive + appropriate water
2, pouring the additive into the container then adding the powder slowly and appropriate water, stirring them into particle paste with no powder no deposition
3, if the wall is too dry, wet the wall before operation, the substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials, for the obvious pore or hole, harsh them with cement slurry, wipe out the sharp edge.
4, using spatula to scraping the slurry onto the surface, suggesting two times, each time keep the thickness under 1mm, the total thickness should less than 2mm.
5, the second time of scraping should after 6~12h when finishing the first time
Technical Reference:
Normal Amount Technical reference
For the smooth surface, and the thickness of putty is 1.5~2.0mm, 18-20m2/set 1, operation: no scratching barrier
2, dry time: ≤5h
3, initial drying crack: no crack
4, surface PH: 8-10
5, water absorption: ≤2
6, bond strength: ≥0.6
7, the dynamic crack resistance: ≥0.3mm
Cautions:
1,do not scraping again and again, finish it within one time
2, after operation, take measures to prevent raining, hot heat, and froze at first 24h
3, the mixed lacquer putty should be used up within 3h, never mix the dry slurry with water and use again
4, this product requiring operating under 5℃~40℃ situation, never operate under raining.
Store Method:
Store in cool and dry place, for the liquid group should stay in the environment above 5 ℃, unopened product can be saved for one year.
Packing:
25kg powder + 2.5kg additive, 25kg powder + 10kg additive
Click enlarge Image
