Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Features:
1, strong cohesive force, good anti-weather function, ensuring the permanent adhesive for the light building materials
2, using thin slurry process, the thickness about 1.5~3mm, reduce the building’ weight the heat bridge or cold bridge of the heat perseveration layer
3, good flexibility, can bear the temperature stress generated by the extend rate between the light building materials and base surface, ensure the permanent adhesive
4, good damp-proof function and ventilation can keep the wall and the painting dry
5, non-toxic, anti-moldy, prevent fire
Surface Treatment:
the substrate surface should be firm, dry and clean, no grease, and other loose materials.
Operation Process:
For the surface:
1, mix the foam mortar with water at the rate of 3.57:1 ( 25kg powder + 7kg water), using an electric mixer to make particle paste, put it aside for 5-10 minutes and then a little stirring to gain the better effect
2, using scraper scraping on the surface
3, for the polystyrene foam board and the foam line with surface adhesive, using tooth scraper scrap on the backside of the foam board or the line, can also use point paste method. After 24 dry, make the next process
3, for the light brick, the moving correction should be completed in ten minutes
Normal Amount:
For the smooth surface, use tooth scraper to scrap, surface about 1.5~2.0kg/m2, the bottom layer about 3-5kg/m2
Cautions:
1, make sure the smooth and vertical rate of the surface before operation
2, if the mortar surface is dry, pick off the surface
3, never mix the dry slurry with water and use again
4, this product requiring the temperature between 5℃ to 40℃
Store Method:
Store in cool and dry place, unopened product can be saved for one year.
Packing:
2kg/bag, 25kg/bag
Click enlarge Image
