gigabti fiber switch with SFP module

Quick Detail

Package & Delivery Lead Time

Detailed Description

Main features 1， Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex. 2， The Fiber slot supports 1000M and Full Duplex mode. 3， Supports flow control and broadcast storm protection. 4， Supports VLAN and QoS. 5， Supports max 10K bytes frame. 6， low power consume (6W), low heat, and good reliability. 7. LED indicator to show the device’s work status. 8. Fiber port: SC, ST, FC, SFP are Optional Technical parameters: 1. Operating standards: IEEE802.3z/AB，10/100/1000Base-T and 1000Base-SX/LX 2. MAC address table: 1K 3. Frame buffer memory: 1MKb 4. Switching capacity:　 12G 5. Connector: UTP：RJ-45，10/100/1000Mbps Fiber slot：1000Mbps 6. Cable: a) UTP: Cat.5 or 6 UTP（the max distance up to 100m） b) Multimode Fiber: 50/125，62.5/125μm（the max distance up to 224/550m） c) Single mode Fiber: 8/125，8.7/125，9/125μm（the max distance up to 10～100 km） 7. Flow control: a) Full Duplex: IEEE802.3x flow control b) Half Duplex: back pressure flow control 8. LED: PWR，F1 Link/Act，F2 Link/Act；TP1～TP4 Link/Act，TP1～TP4 100，TP1～TP4 1000; 9. Power Requirement: AC220V(100-240V)，50～60Hz； DC: 5V, 2A 10. Ambient Temperature: 0 ～ +50℃ 11. Storage Temperature: -40 ～ +70℃ 12. Humidity: 5% ～ 90% 13. Dimensions: 26(high)×90(width)×202(length)mm Explanation for LED indicator lamp 1. Link/Act a) “On”: Connection status display for link. “ON” indicates that link is in correct connection. b) “Blink”: Active status display of fiber port or RJ45 port “Blink” indicates packet goes through media converter 2. PWR a) “On”: Power is on and normal. 3. 1000 a) “On”: Transfer rate of electric interface is 1000Mbps. 4. 100 a) “On”: Transfer rate of electric interface is 100Mbps.

Basic Company Information

Shenzhen Anyk Technology Co., Ltd.

Company Advantage

Detail Company Introduction