UNS.C17510 CuNi2Be Nickel Beryllium Copper

Quick Detail

Package & Delivery Lead Time

Detailed Description

C17510 Details: C17510 Nickel Beryllium Copper CuNi2Be—C17510 (CDA 1751) Nickel Beryllium Copper is the mirror image of alloys C17500 in terms of its properties & Characteristics. C17510 is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a Nickel alloying addition (1.40-2.20%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively. Typical Application for C17510 Nickel Beryllium Copper Alloys: Electrical Industry: Fuse Clips, Switch Parts, Relay parts, Connectors, Spring Connectors, Instruments Parts Fasteners: Washers, Fasteners Industrial: Springs, Thermal Transfer Plates, Welding Equipments, High Flux Electromagnets, Die–Casting Plunger Tips. Available Sizes: Custom Diameter & Sizes, Random Mill lengths Available Products (forms): Round bars, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Chemical Composition: Be: 0.20-0.60% Ni: 1.40-2.20% Cu: Balance Note: Copper plus additions equal 99.5% minimum. Typical Physical Properties: Density (g/cm3): 8.83 Density before age hardening (g/cm3): 8.75 Elastic Modulus (kg/mm2 (103)): 14.10 Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 18 x 10-6 Thermal Conductivity (cal/(cm-s-°C)): 0.57 Melting Range (°C): 1000-1070 Note: 1). the units are based upon Metric. 2). the typical physical properties apply to age hardened products. International Specification: Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3 Strips: ASTM B534, RWMA Class 3 Sheets: ASTM B534, RWMA Class 3 Wires: ASTM B441 Plates: ASTM B534, SAE J461,463; RWMA Class 3 European Standards: CuNi2Be, DIN.2.0850, CW110C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM. Mechanical Properties: The Mechanical Properties will be available on request from customers. Most Commonly Temper Used: Rods/Bars/Tubes: A(TB00),H(TD04),AT(TF00),HT(TH04) Strips: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04) Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00) Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04) Plates: AT(TF00),HT(TH04)

Basic Company Information

ALB (Xiamen) Material Co., Ltd.

Company Advantage

Detail Company Introduction