SSCM Ultra-thin Saw

Quick Detail

Package & Delivery Lead Time

Detailed Description

Number Product Number Specification 1 KWW001 WW140﹡1.2/0.9-1.4﹡25.4﹡60T(with pillow) 2 KWW002 WW160﹡1.2/0.9-1.4﹡25.4﹡40T(with pillow) 3 KWW003 WW160﹡1.2/0.9-1.4﹡25.4﹡60T(with pillow) 4 KWW004 WW180﹡1.2/0.9-1.4﹡25.4﹡40T(with pillow) 5 KWW005 WW180﹡1.2/0.9-1.4﹡25.4﹡60T(with pillow) 6 KWW006 WW205﹡1.2/0.9-1.4﹡25.4﹡50T(with pillow) 7 KWW007 WW205﹡1.2/0.9-1.4﹡25.4﹡40T(with pillow) 8 KWW008 WW205﹡1.2/0.9-1.4﹡25.4﹡48T(with pillow) 9 KWW009 WW255﹡1.4/1.0-1.8﹡25.4﹡48T(with pillow) 10 KWW010 WW180﹡1.2/0.9-1.4﹡25.4﹡48T(with pillow) 11 KWW011 110﹡1.2/0.8～1.6/1.0﹡20﹡30T(no pillow) 12 KWW012 110﹡1.2/0.8～1.6/1.0﹡20﹡40T(no pillow) 13 KWW013 110﹡1.8/1.1～2.0/1.3﹡20﹡30T(no pillow) 14 KWW014 110﹡1.8/1.1～2.0/1.3﹡20﹡40T(no pillow) 15 KWW015 140﹡1.2/0.9～1.6/1.1﹡25.4﹡20T(no pillow) 16 KWW016 140﹡1.2/0.9～1.6/1.1﹡25.4﹡40T(no pillow) 17 KWW017 140﹡1.2/0.9～1.6/1.1﹡25.4﹡60T(no pillow) 18 KWW018 140﹡1.8/1.2～2.0/1.4﹡25.4﹡20T(no pillow) 19 KWW019 140﹡1.8/1.2～2.0/1.4﹡25.4﹡40T(no pillow) 20 KWW020 140﹡1.8/1.2～2.0/1.4﹡25.4﹡60T(no pillow) 21 KWW021 160﹡1.2/0.9～1.6/1.1﹡25.4﹡20T(no pillow) 22 KWW022 160﹡1.2/0.9～1.6/1.1﹡25.4﹡40T(no pillow) 23 KWW023 160﹡1.2/0.9～1.6/1.1﹡25.4﹡60T(no pillow) 24 KWW024 160﹡1.8/1.2～2.0/1.4﹡25.4﹡20T(no pillow) 25 KWW025 160﹡1.8/1.2～2.0/1.4﹡25.4﹡40T(no pillow) 26 KWW026 160﹡1.8/1.2～2.0/1.4﹡25.4﹡60T(no pillow) 27 KWW027 180﹡1.2/0.9～1.6/1.1﹡25.4﹡20T(no pillow） 28 KWW028 180﹡1.2/0.9～1.6/1.1﹡25.4﹡40T(no pillow） 29 KWW029 180﹡1.2/0.9～1.6/1.1﹡25.4﹡60T(no pillow） 30 KWW030 180﹡1.8/1.2～2.0/1.4﹡25.4﹡20T(no pillow） 31 KWW031 180﹡1.8/1.2～2.0/1.4﹡25.4﹡40T(no pillow） 32 KWW032 180﹡1.8/1.2～2.0/1.4﹡25.4﹡60T(no pillow） 33 KWW033 205﹡1.2/0.9～1.6/1.2﹡25.4﹡20T(no pillow） 34 KWW034 205﹡1.2/0.9～1.6/1.2﹡25.4﹡40T(no pillow） 35 KWW035 205﹡1.2/0.9～1.6/1.2﹡25.4﹡60T(no pillow） 36 KWW036 205﹡1.8/1.2～2.0/1.4﹡25.4﹡20T(no pillow） 37 KWW037 205﹡1.8/1.2～2.0/1.4﹡25.4﹡40T(no pillow） 38 KWW038 205﹡1.8/1.2～2.0/1.4﹡25.4﹡60T(no pillow） 39 KWW039 205﹡1.8/1.2～2.0/1.4﹡25.4﹡80T(no pillow） 40 KWW040 255﹡1.2/0.9～1.6/1.2﹡25.4﹡20T(no pillow） 41 KWW041 255﹡1.2/0.9～1.6/1.2﹡25.4﹡40T(no pillow） 42 KWW042 255﹡1.2/0.9～1.6/1.2﹡25.4﹡60T(no pillow） 43 KWW043 255﹡1.8/1.3～2.0/1.5﹡25.4﹡20T(no pillow） 44 KWW044 255﹡1.8/1.3～2.0/1.5﹡25.4﹡40T(no pillow） 45 KWW045 255﹡1.8/1.3～2.0/1.5﹡25.4﹡60T(no pillow） 46 KWW046 255﹡1.8/1.3～2.0/1.5﹡25.4﹡80T(no pillow） 47 KWW047 255﹡1.8/1.3～2.0/1.5﹡25.4﹡100T(no pillow） 48 KWW048 255﹡1.8/1.3～2.0/1.5﹡25.4﹡120T(no pillow） Saw Caution: 1. Please put alloy saw vertically hang the drying rack, be sure to avoid the damp places, do not place alloy saw on the ground or on a shelf,keeping flat will lead alloy blade deformation. 2. Use time, do not exceed the maximum speed. Speed method of calculation is attached for information. 3. Use time, must take protective mask, gloves, helmets,working protection shoes, protective glasses. 4.During the installation Alloy saw, must firstly confirm the function,use of saw table,first read the statement of saw table.Avoid mistakes Install so as to caused the accident. 5.During the installation Alloy saw,must first check whether there is a split distortions, and fill-ping, swaps and other phenomena teeth on alloy saw, and then install it. 6. Super-hard and sharp ofsawtooth alloy saw,prohibit the collision, falling ground, with taking carefully. 7.After install alloy saw blade, the saw core hole must be confirmed whether firmly fixed in the flange of saw table saw, a gasket must be good washer,and then gently hand to push saw blade,confirmed the rotation Whether the eccentric shaking. 8.The cutting direction of Alloy saw arrow must be aimed at rotation direction of saw table.Strictly no installation the opposite direction, the mistake direction will lead out tooth. 9. Pre-turn: the replacement of alloy saw,pre-turn for one minute before the use ,in order to let the saw table into the work status. 10.Before cutting, must confirm whether the use of alloy saw blade is in keeping with the cutting material. 11. Cutting material, it must Qingqingdijiang normal operation of the saw blade intercept material, prohibited Shijinjiangya pushing hard. 12. Prohibit the reverse turn,reverse leads to drop saw teeth, be dangerous. 13.During using, hear unusual voices and see the abnormal shaking, the section is not flat, immediately stop operations and look for unusual reasons.And replace saw . 14.At Cutting, the prohibition of the saw blade to stop suddenly in the middle of cutting. Stop in the middle of cutting,will lead the sawtooth shedding, saw deformation. 15. Pls promptly apply proof-rust oil after cutting.Prevent from saw rust. 16.When the sawtooth is not sharp,pls grind sawtooth again,must go to the manufacturers specify or professional grinding shop. Otherwise it will destroy the original sawtooth angle,impact accuracy cutting and shorten the life of saw blade use.

Basic Company Information

XiaMen ZhongJu Hardware Tool Co.LTD.

Company Advantage

Detail Company Introduction