Quick Detail
Place of Origin
HS-CODE
S04-
Package & Delivery Lead Time
Detailed Description
EMF Meter/ ElectroSmog Meter
10 MHz to 8.0 GHz frequency range.
For isotropic measurements of electromagnetic fields.
Non-directional (isotropic ) measurement with three-channel measurement probe.
High dynamic range due to three-channel digital results processing.
Configurable alarm threshold and memory function.
Easy to use
High frequency (RF) electromagnetic wave field strength measurement.
Mobil phone base station antenna radiation power density measurement.
Wireless communication applications (CW , TDMA , GSM , DECT).
Wireless LAN (Wi-Fi) detection, installation.
Spy camera, wireless bug finder.
Cellular/Cordless phone radiation safety level.
Microwave oven leakage detection.
Personal living environment EMF safety.
RF power measurement for transmitters.
ELECTRICAL SPECIFICATIONS
Sensor type Electric field (E)
Frequency range 10MHz to 8.0 GHz
Directional characteristic Isotropic, 3-dimensional
Measurement range (CW signal>50MHz) 38mV/m to 11V/m
Absolute error(@1V/m and 50MHz) ± 1.0dB
Frequency response (taking into account typ. CAL factor) ± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviation Type. ±1.0dB f>50 MHz
Overload limit 4.2W/m2 (40 V/m)
Temperature response(0 to 50 ) ± 1.5dB
Note
Unless otherwise stated, all specifications hold under the following assumptions:
Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%.
GENERAL SPECIFICATIONS
Measurement method Digital , triaxial measurement
Directional characteristic Isotropic, triaxial
Measurement range selection One continuous range
Display resolution 0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting time Typically 1s ( 0 to 90% of meas. value)
Display refresh rate
Typically 400mS
Display type LCD 4 digit
Audible alarm Buzzer
Measurement units mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display value Instantaneous measured value, maximum value or average value since power-on.
Measurement average time (in per-set steps) 4s to 15 minutes
Measurement alarm function Adjustable threshold with ON/OFF
Measurement calibration factor CAL Adjustable
Manual data memory and read storage 99 sets ( only recall by meter )
Battery 9V
Battery life >15 hours
Accessory 9V battery, carrying case & manual
Click enlarge Image
