Basic Company Information
Company Advantage
Detail Company Introduction
Hebei Kingster Machinery Equipment Co.,Ltd
I Kingster handgrip oxy-gasoline cutting machine
Kingster oxy-gasoline cutting machine which based on particular supersonic injector system is non-pressure in gasoline-tank and able to work on height of 8 meters at any angle equipped with the particular accessory equipment made of strong and durable materials. Kingster oxy-gasoline cutting machine has no problem of back-flash or flameout occurred in conventional flame cutting products as it in-builds gasoline-regulator in torch which enables gasoline and oxygen pre-mix and then detaches in the torch and finally multiple atomizes in the nozzles by mixing. Kingster uses common petrol fuels to cut steel plate, structural material, casting steel and totally replaces acetylene, propane, LPG and Shoppe gas. Kingster is excellent in energy-saving: it saves cost 80%-85% comparing to oxy-acetylene, 30%-40% comparing to oxy-propane, 50%-60% comparing to oxy-component gas.
2、Parameter of Kingster torch
TYPE Nozzle Cutting-oxygen diameter（mm） Cutting thickness （mm） Oxygen pressure（ Mpa）
KINGSTE K-30 1# 0.7 3-15 0.30-0.40
2# 0.9 15-25 0.4-0.5
3# 1.1 25-40 0.50
KINGSTER K-100 1# 1.0 10-25 0.50
2# 1.3 25-50 0.50
3# 1.6 50-100 0.50
KINGSTER K-300 1# 1.8 100-150 0.6-0.7
2# 2.2 150-200 0.7-0.8
3# 2.6 200-300 0.9-1.0
II Kingster semi-auto oxy-gasoline cutting machine
1. It is also named rail-flame cutting machine or linear cutting machine and has series of single-nozzle and multiple-nozzles. Kingster semi-auto oxy-gasoline cutting machine cuts shape of linear, circle, bevel and “V” on steel plate thicker than 5mm.
Kingster semi-auto oxy-gasoline cutting machine makes effective work and takes short time for preparation because of the simple-design and convenient-operation. It can be used in field of shipbuilding, machinery, steel structure, and building or some other enterprises for cutting steel.
2. Technical parameter of Kingster semi-auto oxy-gasoline cutting machine
1. Machine body is made of high-strength micro die casting Aluminum-alloy material.
2. Torch works at any angle.
3. Mainly for strait line cutting, as L, Y, V(45degree).
4. Convex rail
5. Cutting thickness: 5-300mm
6. Cutting diameter of circle: ￠200-￠2000mm
7. Cutting speed: 50-750mm/min
8. Input voltage: AC220V/50Hz
9. Size: 470X230X240
10. Weight: 28 kg
III Kingster duplicating oxygen-gasoline cutting machine
Kingster duplicating oxygen-gasoline cutting machine consists of machine body, spindle, profile institutions, plate clamping device, cutting torch, base, etc. Shaped arm to the front of the template increases, magnetic roller and a cutting torch
designed axis, magnetic model of head and face by the side of flat surface, suction is greater than 16N, magnetic roller driven by a DC motor servo motor rotation decelerating mechanism II, the second reduction gear a pair of helical gears, worm gear to pay a pair of composition, the speed ratio of 1:53. Magnetic wheel with advanced permanent magnet alloy, a diameter of 22mm, when the magnetic head along the model around the mobile, driven boom following the cutting torch, cutting torch correctly Cut out the shape of the work piece with the same model. spindle fixed on the base, as the base arm pivot, there is a balancing device, and the main arm to install the magnetic wheel, cutting torch to maintain a balance Is the rate of gas cutting torch work in the context of any balance of movement, the base bottom with worm can be adjusted in the vertical direction of the movements of torch position, the tube connector type arm mounted on top of a 360 degree turn heighten, 360 can be used within vertical lifting and horizontal position adjustment. Kingster duplicating oxygen-gasoline cutting machine Silicon Control, walking steadily; can sample a variety of shapes cut out parts; applied to the same forms part of the lot size.
Line cutting machine:
Type: CG2-150A Input voltage: AC220V/50Hz
Input voltage: AC220V/50Hz
Cutting Diameter: ¢ 20 ~ ¢ 1800mm
Cutting thickness: 5 ~ 300mm
Cutting speed: 50 ~ 750mm/min
Cutting length: 1650mm
Cutting precision: ≤ 1.5mm
elasticity a square ± 1mm/600mm
Cutting Square: 1270 × 1270mm
Cut rectangle: 340 × 1700mm or 500 ×1650
IV kingster numerical oxygen-cutting machine
1. Kingster numerical oxygen-gasoline cutting machine is one new type of heating cutting machine equipment. it’s working theory based on oxygen and oil ,use the high temperature and high speed of torch as .progeny ,welting the part of the metal that was cutting ,at the same time with the high speed gas blown away the welted metal, formed the narrow lance. Lance is narrow, smooth and few heating zone
Work piece deformation degree is low , operate is simple ,and have obvious in energy saving .this cutting machine is adopt of Linear Guide, Bilateral drive, can be configured multiple torch , plasma torch and Supporting automatic adjusting system according to the customers` demand .,can be configured as numerical and Straight cutting. And can be Optional automatic adjusting system .
2. Kingster numerical oxygen-gasoline technical parameter:
The whole body Stable performance, smooth running and good dynamic performance, high precision
Strong resistance to high frequency interference
Automatic ignition, automatic capacitance increase
NC programming: automatic Anagram AutoCAD-based graphical programming software
Cutting speed: 1-3500mm / min
Cutting precision: the national standard JB/T10045.3-99
Mobile Accuracy: 0.01mm / step
Cutting thickness: 5-300mm
Power Supply: AC input 220V, 500-1000W
Automatic increase in travel: 150mm-230mm
Ⅴ KINGSTER-BX-100 Portable gasoline cutting machine
KINGSTER-BX-100 Portable gasoline cutting machine caters to cut all kinds of carbon steel and alloys less than 100mm with high temperature flame created from oxygen-gasoline. The product produced according to JB/T 10248-2001 “gasoline cutting machine” standard.
KINGSTER portable gasoline cutting machine has fast cutting speed, low consumption, cutting surface is smooth, no residue, no nodulation, catchy melting clear corner, work is not tempered, safety and environmental protection, applicable to high temperature, high humidity, cold , high altitude, wilderness, outdoor environmental conditions and the lack of power supply . Used in iron and steel, shipbuilding, automotive, military, petroleum, chemical, construction, bridges, machinery and equipment manufacturing and other industries, is the alternative to the traditional acetylene cutting of a new generation of cutting machinery
The portable gasoline cutting machine has been used in the petrochemical, military, construction, machinery manufacturing, transportation, body decomposition, security, rescue and other industries. The economic performance received unanimous praise, test data are summarized as follows:
1, cut 12 mm of steel, gasoline cutting costs is 43% of oxygen-acetylene consumption,
2, cut 20 mm of steel, gasoline cutting costs is 39% of oxygen-acetylene consumption,
3, cut 30 mm of steel, gasoline cutting costs is 34% of oxygen-acetylene consumption,
Portable gasoline cutting machine - the main performance parameters
1. Product Cutting range: carbon steel, alloy steel
2. Fuel grade: 90 # Gasoline
3. Rated note oil (L): 1.3
4. Oxygen calibration pressure (MPa) :0.4-0 .6
5. Cutting thickness (mm) :3-300
6. Operating distance (m): 6
7. Working environment temperature (℃): -20 ~ 50
8. Operating noise level (dB): ≤ 54
9. Operating dust concentration (mg/M3): ≤ 2
10. Machine weight (Kg): 12
Portable gasoline cutting machine - supply configuration:
1. Special brace
2. Hand cutting torch set (three cutting nozzle)
3. Gasoline Hose / oxygen tube (2 meters)
4. Carbon fiber composite oxygen cylinders, oxygen pressure reducer
0 likes
Click enlarge Image
