Multiparameter Monitor--MD908

Quick Detail

Package & Delivery Lead Time

Detailed Description

Meditech MD908 is a compact Multi-parameter monitor with color TFT display. It has standard parameters as ECG, NIBP and SPO2, and optional parameters as RESP, 2-TEMP, 2-IBP, ETCO2, Network, Thermal Printer, Pacing Maker. l ECG Lead type : 5-lead Input : RA; LA ;RL ;LL ;V Sweep speed : 12.5mm/s, 25mm/s, 50mm/s Accuracy : 1¾1bpm or 1¾1%, which is greater Protection : Withstand 4000VAC/50Hz voltage in isolation against electrosurgical and defibrillation S-T detection : YES, Arrhythmia analysis : YES Alarm : YES, audible and visual alarm, alarm events recallable NIBP Method : Oscillometry Operation modes : Manual/Automatic/STAT Measurement unit : mmHg / KPa selectable Measurement types : Systolic, Diastolic, Mean Over-pressure protection : YES l SPO2 Measurement range : 0-100% Accuracy : 2digit(70~100%) 0~69% unspecified l Standard Configuration ECG, NIBP, SPO2 Optional RESP, 2-TEMP, 2-IBP, ETCO2, Network, Thermal Printer, Pacing Maker ECG Lead Mode 5 Leads ( R, L, F, N, C or RA, LA, LL, RL, V) Lead selection I, II, III, avR, avL, avF, V, Waveform 2 ch Lead mode 3 Leads ( R, L, F or RA, LA, LL) Lead selection I, II, III, Waveform 1 ch Gain ´2.5mm/mV, ´5.0mm/mV, ´10mm/mV, ´20mm/mV HR and Alarm Range Adult 15 ~ 300 bpm Neo/Ped 15 ~ 350 bpm Accuracy ±1% or ±1bpm, which great Resolution 1 bpm Sensitivity > 200 uV P-P Differential Input Impedance > 5 MΩ CMRR Monitor > 105 dB Operation > 105 dB Diagnosis > 85 dB Electrode offset potential ±300mV Leakage Current < 10 uA Baseline Recovery < 3 s After Defi. ECG Signal Range ±8 mV (Vp-p) Bandwidth Surgery 1 ~ 15 Hz Monitor 0.5 ~ 35 Hz Diagnostic 0.05 ~ 100 Hz Calibration Signal 1 mV (Vp-p), ±5% Accuracy ST Segment Monitoring Range Measure and Alarm -2.0 ~ +2.0 mV ARR Detecting Type ASYSTOLE, VFIB/VTAC, COUPLET, BIGEMINY, TRIGEMINY, R ON T, VT>2, PVC, TACHY, BRADY, MISSED BEATS, PNP, PNC Alarm Available Review Available 　 RESPARATION Method Impedance between R-F(RA-LL) Differential Input Impedance >2.5 MΩ Measuring Impedance Range: 0.3~5.0Ω Base line Impedance Range: 0 – 2.5 KΩ Bandwidth 0.3 ~ 2.5 Hz Resp. Rate Measuring and Alarm Range Adult 0 ~ 120 rpm Neo/Ped 0 ~ 150 rpm Resolution 1 rpm Accuracy ±2 rpm Apean Alarm 10 ~ 40 S 　 NIBP Method Oscillometric Mode Manual, Auto, STAT Measuring Interval in AUTO Mode 1, 2, 3, 4, 5, 10, 15, 30, 60, 90, 120, 180, 240, 480 Min Measuring Period in STAT Mode 5 Min Pulse Rate Range 40 ~ 240 bpm Alarm Type SYS, DIA, MEAN Measuring and alarm Range Adult Mode SYS 40 ~ 270 mmHg DIA 10 ~ 215 mmHg MEAN 20 ~ 235 mmHg Pediatric Mode SYS 40 ~ 200 mmHg DIA 10 ~ 150 mmHg MEAN 20 ~ 165 mmHg Neonatal Mode SYS 40 ~ 135 mmHg DIA 10 ~ 100 mmHg MEAN 20 ~ 110 mmHg Resolution Pressure 1mmHg Accuracy Pressure Maximum Mean error ±5mmHg Maximum Standard deviation ±8mmHg Overpressure Protection Adult Mode 297±3 mmHg Pediatric Mode 240±3 mmHg Neonatal Mode 147±3 mmHg SpO2 Measuring Range 0 ~ 100 % Alarm Range 0 ~ 100 % Resolution 1 % Accuracy 70% ~ 100% ±2 % 0% ~ 69% unspecified Actualization interval about 1Sec. Alarm Delay 10 Sec. Pulse Rate Measuring and Alarm Range 0~254bpm Resolution 1bpm Accuracy ±2bpm Alarm Delay 10 Sec. MASIMO Specification: Range Saturation(%SpO2) 1%~100% Pulse Rate(bmp) 25~240 Accuracy Saturation(%SpO2) － During No Motion Conditions* Adults 70%－100％±2digits 0%-69% unspecified Neonates 70%－100%±2digits Saturation(%SpO2) － During Motion Conditions** Adults 70%－100％±3digits 0%-69% unspecified Neonates 70%－100%±3digits Pulse(bpm) － During No Motion Condition 25 to 240 ± 3digits Pulse(bpm) － During Motion Condition 25 to 240 ± 5digits Resolution Saturation(%SpO2) 1% TEMPERATURE Channel 2 Measuring and Alarm Range 0 ~ 50 °C Resolution 0.1°C Accuracy ±0.1°C Actualization interval about 1 Sec. Average Time Constant < 10 Sec. 　 EtCO2 , IBP , Recorder

Basic Company Information

Meditech Group Co., Ltd.

Company Advantage

Detail Company Introduction