magnetic flowmeter

Quick Detail

Package & Delivery Lead Time

Detailed Description

Diameter: 10-2200mm Combination: S. Integrated type L. Remote type Electrode Material: M. Stainless steel 316 T.Ti D.Ta H. Hastelloy alloy P.Pt N.Ni Features and benefits No moving parts; Virtually no pressure drop; Minimal maintenance Wide range of nominal diameters; Broad selection of lining and electrode materials Applications for magnetic flowmeters are: Monitoring and control of a variety of industrial effluents Paper pulp waste Mining slurries Brine Liquid food products Detergents Waste sludge in sewage treatment plants and water and waste industries. Corrosive acids Solid bearing fluids Electrolytes Process chemical Advantages for magnetic flow meters Non obtrusive flow in full-bore models No moving parts Virtually no pressure drop Insensitivity to viscosity, specific gravity, temperature and pressure (within certain limitations) Will work with laminar, turbulent, and transitional flows Can respond well to fast changing flows (for high-frequency DC pulse and AC excitation designs only) Good accuracy (0.5 to 1%)Can handle slurries and heavy particulates Lining protectors available for harsh, chemically corrosive, and abrasive fluids  General Specification: Power Supply: 85-265Vac (Optional: 18-36 Vdc) Power Consumption: 10W Accuracy: ± 0.5% accuracy of rate from 0.5-10 m/s ± 1.0% accuracy of rate from 0.1-0.5 m/s Repeatability: 0.2% Minimum Fluid Conductivity: 5.0 micromhos/cm Flow Direction: Unidirectional or bidirectional, 2 separate totalizers (programmable) Analog Outputs: 4-20mA, 500ohms Max Load Output Frequency: Scaled Pulse output, (open collector) Max 5Khz Noise Damping: Programmable Pulse Width: Programmable up to 500ms Zero-point Stability: Automatic correction Ambient Temperature: -4 to 140° F (-20 to 60° C) Electrode Materials: Standard: 316 Stainless Steel Optional: Conduct Factory Liner Material: PTFE, FEP (Rubber) Fluid Temperature: PTFE: 100°C Standard (Customized: 180°C) FEP: 60°C Pressure Limits: 1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa Coil Power: Pulsed DC Pipe Spool Material: 316 Stainless Steel Meter Housing Material: Carbon Steel welded Flanges: Carbon Steel - Standard (ISO 7005-1) 316 Stainless Steel - Optional Optional Stainless Steel Grounding Ring

Basic Company Information

Tianjin Sure Instrument Science & Technology Co.,

Company Advantage

Detail Company Introduction