AUTOMATIC HIGH-SPEED VACUUM FORMING MACHINE model：AVF-4828DO

Quick Detail

Package & Delivery Lead Time

Detailed Description

model：AVF-4828DO： Forming length 48’’（1220mm） Forming width 28’’(710mm) Forming height about10’’(250mm，According to the different materials and mould, here is certain difference) Production rate Maximum : module / 6S Power of oven Maximum :48KW Power of motor 7.5KW Vacuum pump 2.2KW Compressor 15KW Total power consumption About 45KW（According to the material, mould vary) Installed power 75KW（Including the air compressor） Mechanistic dimensions 7100*1550*2600mm Net weight About 3500KG Pneumatic components SOAR Home made Electromagnetic valve SMC Japan Separated water and oil SMC Japan Relay OMRON Japan contactor FUJI Japan Time control OMRON Japan Spray gun MIJI（10pcs） Japan Encoder NENICON Japan Inverters INOVANCE Taiwan Heating system Use "FULE" 60 pcs 400W ceramic infrared heat tiles Temperature control system By 120 groups SCR temperature control, a control of a temperature control (with automatic voltage regulator function) Cooling system Carrying water trays, waster transport rail, equipped with powerful centrifugal fan, 2 sets of lead air outlet trough The machine features: 1, The machine adopts frequency Madara chip design; 2, the rodless cylinder slice machine design; 3, the machine first vacuum valve using mechanical suction vacuum dual synchronous design; 4, the machine parts with hard chrome plated design; 5, the machine The machine is sealed design (furnace installation of the door); 6, installed on the machine positioning mode, the next orientation using electric adjustment; 7, the machine forming part of the installation of lighting; 8, this machine before and after the hand rail with the same tone design 9, this machine uses linear slide up and down simultaneously to go heater furnace design; 10, this machine with automatic feeding rack design. Special Features: 1) Automatic mode with the transfer 2) the second function on the mode 3) under the modulus function of secondary 4) The functions of secondary hair 5) a vacuum function 6) fine-tune the aerodynamic features 7) The central lubricating system 8) easy to debug functions in the gate 9) under the model with the transfer function 10) withdrawn from the furnace function 11), the faster mode function 12) Automatic spray silicone feature 13) cold auto-off function 14) Environmental Information System functions 15) Ordinance No adjustable brake pressure 16) The gates of the upper and lower mouth stepless 17) Production Depends counting function 18) in advance functionality Spray 2) Vacuum Pump: The United States "AIRTECH" 100m3/hr 1 station (attached) Three) chiller: Home "DONGJUN" 5HP 1 station (attached)

Basic Company Information

Dongguan Junxiang Machinery Co.,ltd.

Company Advantage

Detail Company Introduction