Precise tester for Powder Metallurgy Parts MH300Q/600Q

Quick Detail

Package & Delivery Lead Time

Detailed Description

Suitable for: Pneumatic Tool Industry, Machine Elements, new Material Research Principle: In accordance with ASTM B311, B328; MPIF Standard 42, 45; JIS Z2505, Z2506; GB/T5163 standard, can accurately and directly measure the density. Technical data Powder metallurgy is formed through several procedures. Firstly put the mixed powder of metals including alloy、oxide、carbide and lubrication agent and then drop into a mould and form it under high pressure. After forming it up, put the parts into sintering furnace for Densification. To coordinate with some necessary materials and techniques, then the needed products can be made. Powder metallurgy is made into complex shapes component after thinning the powder particles of metal. This method has replaced the traditional machining method. Therefore the measurement of sintered materials’ density is very important. MH-300Q/600Q builds an oil-content formula inside. Measuring steps are difference from MH-300P/600P Firstly, measure oil-contented sample’s weight-in-air and its weight-in-water, then burn the oil off, and lastly measure its weight-in-air. Functions Procedure 1: MH-300Q/600Q can directly measure the wet density, oil-content, bulk density of sintered metal structural parts Procedure 2: MH-300Q/600Q can directly measure the density of sintered metal structural parts Specification Model MH–300P MH-600P Measurable range 0.005g〜300g 0.01~600g Average weight 0.001g Density resolution 0.001 g/cm3 Testing time About 10 seconds Setting Can set compensation of water/temperature and, can set the density of lubrication oil Functions Formula 1 Can directly show the wet density, oil content and bulk density Formula 2 Can directly show the density of sintered metal structural products Standard interface RS-232

Basic Company Information

Group Prospers Enterprise Co.,Ltd

Company Advantage

Detail Company Introduction