injector test and clean machine ECM-1000C

Quick Detail

Package & Delivery Lead Time

Detailed Description

Switch on with DC12V; Prepare the mixture of petrol and cleaning detergent in fixed proportion，then put it into the tank from the filling opening in the back of the machine. Make sure the tank top off before cleaning in order to permit a freer passage of air and decrease the pipeline pressure. Identify the target injector is a carburetor、an electronic injector or a mechanical injector, and its cylinder number 。 Find the in-line and return-line of the engine and pull the later out, and then connect the return-line of the auto carbon cleaner to the engine with a matched joint. Start the engine to help oil return to the oil storage tank. Pull out the engine’s in-line. Connect the engine’s in-line hole to the cleaner’s return-line with a matched joint in order to make oil flows from the in-line back to the tank through the return-line. Connect the cleaner’s in-line to the engine’s in-line hole with the help of the matched joint. When the cleaner starts, it offers oil instead of the engine. Switch on again and check no joints leak. Every leak should be repaired. Regulate operation time. 10min for slow cleaning at first and 5min for quick cleaning later on. Slow again at last. The engine will be turned off automatically when the cleaning is finished. Please replace the car key switch board. Pull out all the auxiliary joints. Reset the in and out line of the engine. Start and accelerate the engine to check no joint or line leaks. Get the cleaner arranged for the next use.

Basic Company Information

ECCOM international holding limited

Company Advantage

Detail Company Introduction