Drag chains made of TLG shape steel

Quick Detail

Package & Delivery Lead Time

Detailed Description

The TLG drag chains are suitable for installing a large quantity and heavy duty of cables and oil pipes which allow suspending installation(supporting is not allowed)and is lengthy.The supporting plate can be made according to the user's requirements.It is suitable for machine tools and moving machines.Their bend radius ranges from 50-600mm and the chain's height is from 35to 150mm .Users cna make a free selection of them. The TLG type drag chains has a max.Travel range of 32 meters and are suitable for all kinds of transmisissions.It can freely be made longer or shoter.In addition ,the bend radius can be changed changing the pinshaft. The width of the supporting board is from 150mm to 600mm .The distance between the holes is 5mm. The height of the supporting board depends on the max.Outside diameter of the cables.When the machine tool is working in the highest speed and if the max.width of the drag chain is longer than 300mm with the chain's length longer than4m,one siza large than normal should be selected just out of considration of safety. The bend radius should be seleted according to the max diameter of the cable used.The bend radius can be selected as 50-600mm according to the giver table.Small radius should be selected for those ones with small travel range Drag chain length=1/2 travel range+4bend radius,this is onlly used for the fixed connection which is located at the middle point of the travel range. The fixation of the drag chains cna done according to the location of the machine tools.The angle steel can be put in the outer or the inner ,in other words,in the inner side of the chains of in the outer side.In common cases,it is in the inner side of the chains and face towards outside.

Basic Company Information

Hebei Liancheng Machine Tool Accessories co.,

Company Advantage

Detail Company Introduction