Quick Detail
Place of Origin
HS-CODE
84-
Package & Delivery Lead Time
Detailed Description
We will be happy to give you a quotation upon receipt of your detailed requirements.
Alina Li
YUSU Technology Co.,Ltd.
www.yusumx.com
Tel: +8613265465877
Skype: yusu.technology
Email: sales@yusumx.com
E1/10(100)Base-T Protocol Converter
FEATURES
●10/100BASE-T ehternet port and G.703/E1 conversation
●High performance,self-learning remote ethernet bridge.Its compact size and low cost make it ideal for cost-sensitive bridging applications.It can learn LAN MAC address and decide whether to send or filter according to data frame MAC address.More than 10000 address are stored in its LAN table and can be updated automaticaly.The max filter and forward rate reaches 30000 frame(line rate),the buffer contains 256 frames,throughput pending is 1 frame.
●Operationing as LAN extender or subsector of flow basic confguration ,it has filter or filter forbiding operation mode to decide if all telecommunications can be transmitted on WAN line.
●Rate conversation, comprising 1.92M data channel in G.703E1
SPECIFICATIONS
● Interface: E1,10/100 BASE-T
● Interface code rate: 1.92 Mbit/s±50ppm
● 10/100BASE-T port transmission side: 1.92Mbits/s 10/100BASE-T port user side: 10Mbits/s
● E1Impedance: 75 non-balanceable/120 balanceable
● Power supply: AC input 100 V~ 240V;DC output 5V,1A Power onsumption:<5W ●Environment: operation temperature: Biz 0℃~55℃ Industry:-20℃~-60℃ War industry: -40℃~85℃ storage temperature:-45℃~85℃ Humidity:5%-95% non condensation
● Dimension: 220×177×35mm
● LEDs: PWR: green,power LINK: green,ethernet port detects the input signal FDX: yellow,ethernet port in full duplex mode RX:yellow, ethernet port is receiving data TX: yellow, ethernet port detects confliction
COL: yellow,ethernet port detects confliction
E1LOS: red,E1 line code intertuption warning,showing the local terminal warning
E1SYN: red,E1 port receiving signal frame malajustment warning
AIS: green, E1 port receives AIS warning
CRC: yellow, verify error
ORDERING:
MODLE FEATURE
YS-E111-1/4/8 1/4/8E1 to 10/100Base-T protocol converter
YS-E111-EVA/D/M E1 to V3.5 protocol converter
YS-E111-V11A/D/M V3.5 to 10/100Base-T protocol converter
E1/RS232 Protocol Converter
FEATURES
● Rs232 RATING: 0-115.2K self adapt
● Provide 2 loop function: E1 local loop,Rs232 local loop.
● The positive and negative terminal can be exchangde for DC-48V.easy for installation and maintenance.
● Have pseudo random code test function, easy the for installation and maintenance.
● E1 Impedance:75Ω(unbalance),120Ω(balance).
● Network manager interface use SNMP.
● Two types:
Standalone:desktopl,19inch;Card type,usually be 19 inch.
SPECIFICATIONS
Communication:
Interface standard According ITU-TG.703,RS232 standard
E1 signal (BNC) IN , OUT
E1 signal(RJ-45) T+,T-,R+,R-, GND
Working Synchronous serial, Iucency transimission
E1 interface rate 2.048Mbps
RS232 interface rate
E1 port coding 115200bps
HDB3
E1 port tranisimission 2KM
E1 port protection 1500V electromagnetism isolate
RS232 port protection 600W surge protection, 15 KV static protection
E1 port connector 120 Ohm(RJ-45) and 75 ohm(BNC double coaxial)
RS232 port connector DB-25 female
Environment:
Working temperature Biz:0℃~55℃ Industry:-20℃~-60℃War industry:-40℃~85℃
Srorage temperature -45℃~-85℃
Humidity Relative humidity 5% to 95%
Power:
Input power 220VAG
Consumption 2W
Dimension
LxWxH 227mm×147mm×42mm
Shell Plastic
Color Black
Weight 260g
APPLICATION
● Convert RS232 interface to E1(2M unframed G .703) interface
● Support line recovery clock, local clock and equipment clock
● Support E1 port loop
● E1(G.703) interface support 120ohm (RJ-45) and 75ohm(BNC double coaxial)
ORDERING:
MODLE FEATURE
YS-E232-A E1 to RS232 Protocol Converter Standalone 220VAC Power Supply
YS-E232-D E1 to RS232 Protocol Converter Standalone -48VDC Power Supply
YS-E232-M RS232 Protocol Converter Module
TDM over IP Device
FEATURES
● Four E1/T1 Ports supported, E1or T1 easy selected by Web Manager
● Point to point and point to multipoint supported
● User-friendly Web server supported for easy setup and maintenance
● Uplink ports 1+1 backup supported
● Stable E1-T1 clock recovery, low jitter and wander
● Low processing delay for E1/T1 channels, high bandwidth usage efficiency
● Resist to packet loss, with PCM frame synchronization protection
● User definable encapsulation packet size for different application
● Enough jitter buffer to resist packet delay bariation(PDV)
● Local Ethernet port throughput limiting, assuringE1/T1QoS
● Local and remote E1/T1 LOS and AIS and packet lossindiction for trouble- shooting and maintenance
● Support cascade concatente for more than 4E1/T1 ports
SPECIFICATIONS
● Uplink:Comply with IEEE802.3
● E1/T1 Port:4E1 or 4T1 ports supported Comply with G.703 Impedance:E1-120Ω T1-100Ω or 75Ω
● User Data Port:2User data ports supported
Comply with IEEE802.3
10/100Mbps auto-sensed
Full/Half duplex auto-sensed
Web Manager supported
● Power: Supply -48V DC or 220v(110v) AC or dual power supply +24 VDC
Consumption ≤10W
● Working Environment: Temperature
Biz:0℃~55℃
Industry:-20~-60℃
War industry:-40℃~85℃
Relative Humidity≤90%(non-condensing)
● Dimension:W×H×D(mm) 440×44×230
ORDERING:
MODLE FEATURE
YS-TID-1A 1E1 over 1 Ethernet pot, Standalone, AC220V power supply
YS-TID-1D 1E1 over 1 Ethernet pot, Standalone, DC-48V power supply
YS-TID-4A 4E1 over 1 Ethernet pot, Standalone, AC220V power supply
YS-TID-4D 4E1 over 1 Ethernet pot, Standalone, DC-48V power supply
RS-232/485/422 Serial Server (10/100M)
FEATURES
● Auto-detecting 10/100Mbps Ethernet interface
● 3-in-1 RS-232/422/485 serial interfaces
● Cigarette pack size for easy integration
● Cupports Windows Native COM drivers with automatic network connection recovery
● Buit-in Ethernet and TCP/IP protocol supports Driver Mode,TCP Server,TCP Client,UDP Server/Client, Ethernet Modem,Pair connection
● Supports Linux fixed/real tty drivers
● Rs-485 supports ADDC(Automatic Data Direction Control intelligence)
● Built-in 15 KV ESD protection for all serial signals
SPECIFICATIONS
● Serial
Standard Accord EIA RS-232. RS-485, RS422 standard
RS-232 signal TX, RX, RTS, CTS, DTR, DSR, GND
RS-485 singal D+, D-, GND
RS-422 singal R+, R-, T+, T-, GND
Working format Asynchronous format,point to point, 2wires half duples, 4wires full duplex
Direction RS485 side adoptADDC technology, auto text and control data trandfer direction
Runoff Support RTS/CTS Flow Control or non-flow control
Baud rate 150-11520bps
Bit byte 7bit, 8bi
Check out No-checkout, odd, even, Mark chenckout, Space checkout
Loading RS-485/422side support 32or 128 point loopback
Transmission RS-485/422side 1200M, RS-232 port 15M
Interface protecction 600W surge protection, 15KV static electricity protection
Connector RS-232 side DB-9 male. RS-485/422side 4terminal block
● Ethernetport
Standard Accord 10Base-T/100 Base-Tstandard
Protocol Support TCP, UDP, APR.ICMJP and DHCP protocol
Signal Rx+,Rx-, Tx+,Tx-
Working format Support Server and Client mode
Rate 10Mbps, full-duplex or half-duplex
Mermory 512 byte
Transmission 100m
Electromagnetism isolate 1500V
Connector Rj45
● Environment
Working temperature Biz:0℃~55℃ Industry: -20℃~-60℃ War industry:-40℃~85℃
Storage temperaturej-45℃~85℃
Humidity Relative humidity 5℃~95℃
● Power
Input powered External 5V power
Consumption 300mA
● Dimension
L*W*H 100mm*69mm*22mm
Shell Iron
Color White
Weight 230g
ORDERING:
MODLE FEATURE
YS-SS244-F RS-232/485/422 serial device server(10/100M)
YS-SS244-FA4 4 port RS-232 serial device server
YS-SS244-FB4 4 port RS-485/422 serial device server
YS-SS244-FA8 8 port RS-232 serial device server
YS-SS244-FB8 8 port RS-485/422 serial device server
YS-SS244-FA16 16 port RS-232 serial device server