High Pressure Micro-powder Mill

Quick Detail

Package & Delivery Lead Time

Detailed Description

High Pressure Micro-powder Mill High Pressure Micro-powder Mill is the latest industrial micro-powder grinder, it’s a new type grinding machine for producing micro-powder. Main structure: High Pressure Micro-powder Mill mainly consists of main frame of the mill, superfine seperator, cyclone, bag filter and pipes. According to the requirement of the customer, it can be equipped with elevator, hopper, electric control panel, feeder, crusher and other subordinate equipments. In the grinding chamber of the mill, roller assembly hangs on the hanger frame through crosspiece, and the hanger frame joint firmly with main shaft and shovel frame. Pressure spring presses the external part of suspension arm of the roller assembly; making the crosspiece as a catch point, rollers press the inner surface of the ring through compression force of the springs. When the motor runs by means of driving gear, shovels fixed on the shovel frame run with the rollers at the same time; the rollers roll on the inner surface of ring, simultaneously they run around themselves. Seperator drives the impellor rotate by the driving gear of the motor, and the fineness of the final products can be decided by the speed adjustment of the seperator. Working principle: The crushed materials are transferred to the hopper through the elevator, then to the grinding chamber of mill through the vibrating feeder then the materials are put into the space between roller and ring by the shovel for grinding. The blower will blow the air into the grinding chamber, the powder will be flown into the separator for separation, if the size of powder does not meet the requirement, it will fall down for regrinding, the qualified powder will flow into the powder collector with air current. The vapor will exist due to grinding process to material with moisture, and the outer air may be sucked in due to bad seal condition of pipes of the whole system, then the circulating air amount increases. In order to keep the mill operating under negative pressure, the extra air should be released to the atmosphere through the bag deduster. Technical parameter: Model YGM7826 YGM8327 YGM9531 Items No. of roller(piece) 3 3 4 Diameter of Roller (mm) Ф260 Ф270 Ф310 Inside Dia.of Ring(mm) Ф780 Ф830 Ф950 Speed of Main Frame(r/min) 160 140 130 Max.Input Size(mm) ＜20 ＜20 ＜25 Capacity(kg/h) 25-500 30-680 150-1000 Motor Model of Main Frame,Power(KW) Y225S-8-18.5 Y225M-8-22 Y225S-4-37 Motor Model of Blower,Power(KW) Y160L-4-15 Y180M-4-18.5 Y220M-4-30 Motor Model of Separator,Power(KW) Y160M-6-7.5 Y160M-6-7.5 Y160M-6-7.5 Total Power(KW) 41 48 74.5 Dimension(L×W×H)(m) 4.5×4.2×5.1 5.3×4.1×5.2 7.1×5.9×7.9 Weight(t) 4.8 6 11.5 Output Size(mm) 500mesh (0.025mm)-1250 mesh (0.01mm),the　finest　2500 mesh (0.005 mm)

Basic Company Information

Henan Shibo Mechanical Engineering Co.,Ltd

Company Advantage

Detail Company Introduction