LESF-KH2(No by-pass ) | Global Trade leader ecrobot

Product

LESF-KH2(No by-pass )

Posting date : Mar 06, 2010

Click enlarge Image

Membership

Free Member Scince Mar 06, 2010

Keyword :

Category

METALS | Articles o

Contact

0 likes

Product Detail

Company Info

Quick Detail

Place of Origin

HS-CODE

73-

Package & Delivery Lead Time

Detailed Description

3/8'BSPThread , 10Liter/Min Suction Strainer/Sump Strainer Features Stainless steel mesh Re-usable Epoxy bonded joints for compatibility with all fluids Rugged steel inner support Nylon fitting/Nylon end caps (210° max) 100~125 mesh from stock Options No by-pass or 3 psi by-pass available Custom sizes and mesh are available upon request Model: LESF-KH2(No by-pass ) Norminal Flow:10Liter/Min Pipe Size: 3/8'BSP OD: 66mm, 3in Length:100mm,3.94in $:10.04 Suction Strainer Elements are designed for installation into suction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir. Standard models have nominal filtration ratings of 74 or 125 microns. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results, suction strainer elements should be sized for clean element pressure drops off no higher than 0.5-.07 psi. suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.