Roller track(JY-2045)

Quick Detail

Package & Delivery Lead Time

Detailed Description

This roller track belongs to JY series in our factory , which is a part of the pipe rack system .it is very easy to use and protects the environment , because it can be reused for many times ,and the makeup is simple too , and it is inexpensive , so it is widely used in many fields , such as , electronics / machinery / automobiles / home appliances / light industry , and so on . SPECIFICATION: “U” channel : aluminium alloy Rollers: diameter 34mm (Black) Fitting: JY series connectors “U” channel : steel sheet (galvanized) Rollers: diameter 34mm (White) Fitting: JY series connectors How to calculate the length of roller track The standard gradient is 6% (~3.5°) ， so to measure a track in relation to its overall length , the calculation is follows: The length of the roller track equivalent to the overall length-65mm Margin: the maximum margin must be less than 5mm divided between the two ends. HOW TO CACULATE THE LENGTH OF CENTER AND EDGE GUIDES The length of a GL edge guide is that of the roller track minus 100 mm. The length of a GC center guide is identical to that of the roller track TIPS: 1、 Cuting tracks too short weakens the whole level of the rack . Avoid using tracks whose length is different to that of the internal dimension of the level. 2、 Protruding tracks may make a risk of injury when assembled incorrectly . 3、 The correct way of assembling a roller track must obey blows: The maximum margin between the connector end-stop and the rail is 5 mm. Remember the standard gradient is 6% Track length=overall length-65mm

Basic Company Information

Shenzhen Yongmengsheng Hardware Products Factory

Company Advantage

Detail Company Introduction