High Pressure Suspension Mill

Quick Detail

Package & Delivery Lead Time

Detailed Description

High Pressure Suspension Mill can be used for ultra-fine powder processing of 280 non-inflammable and non-explosive materials with Moth’s hardness below 9.3 and humidity below 8%, such as barite, limestone, pottery, scoria, in the works of mining, metallurgy, chemical, building materials. The particle size of finished product can be adjusted from 80-425 mesh. With the special device installed in the machine, it can produce 30-80 mesh coarse powder. Working Process In the mainframe of High Pressure Suspension Mill, there are strong springs with pressure of 1000-1500kg equipped on the roller suspender. When High Pressure Suspension Mill works, the roller rotates around the principal axis, and clings to ring under the effect of the strong spring and. Its press is 1.2 times of Raymond mill under the same press condition, so the production is largely increased. When the materials are sent into the grinding chamber, they are brought to the space between the roller and ring and get grinded. Then the powder grinded will be blown into separator. The fine powder after departed with the air is discharged through the outlet as final product. The large-sized powder falls back for regrinding. The circulation wind will be back to the blower for repetition of the above process. The left air will come to the bag filter to get cleaned. When the wear and tear between roller and the ring reaches certain degree, adjust the length of the strong spring to keep the invariable pressure between the roller and the ring, to make sure the stable production and the fineness. Main Characteristics 1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring. 2. All the materials with Moth’s hardness below 9.3 can be grinded and smashed. 3. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh). 4. High Pressure Suspension Mill meets the requirement of national dust-dump standard. 5. The separator can be adjusted very easily. 6. The multi-class seals are adopted to keep the grinding equipment tightly closed. YGM65, YGM75, YGM85, YGM95, YGM130.

Basic Company Information

Henan Yulong Heavy Industry Machinery Co., Ltd.

Company Advantage

Detail Company Introduction