Necktraction Fixer (DX-A Without magnets)/Cervical Tractor

본문 바로가기


Home > Product > Necktraction Fixer (DX-A Without magnets)/Cervical Tractor
Product
Necktraction Fixer (DX-A Without magnets)/Cervical Tractor
Posting date : May 28, 2011
Membership
Free Member Scince Jun 01, 2009
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
90-
Package & Delivery Lead Time
Detailed Description
The portable Necktraction Fixer is a new type product for human health care. It is good for the patients, who are suffered by cervical spondylopathy. Using the product Frequently can help to preventing and treating the cervical spondylopathy, alleviating the fatigue in neck area and can auxiliary cure the uncomforting caused by vertebra disease. It is a product with the function of traction, fixing, magnetic cure and health care, especially helpful for the mid and old aged people. There are two models as A and C. DX-A (without magnetics) and DX-C (with magnetics). Characteristic of use 1. Practical and effective: not only can be used inside and outside the room, but also can be used when you are sitting and lying. 2. Convenient of carrying: a portable design for carry easily. 3. Simple operation: You can adjust the angles and strength of traction by yourselves. 4. Safety: this product causes no pain, risk and any side effect if used in accordance with the instruction given. Characteristic of function: This product is small in volume; light in weight (250g), powerful in traction (0~80kg) and long in traction rang (1~20cm). It has a special dynamic structure, which can automatically protect the sensitive area in front of neck area when pumping. The three air chambers are divided into high and low respectively; the low part can be separated partly in order to adjust the angles and traction. Close the high part after enough air pumped which can make patients feel comfortable in the course of traction and fixing adjustment. There are three high performance magnets used in DX-C Neck Traction Fixer, which will be helpful to enhance the curative effects in health care. Usage: 1. Put the Neck Traction Fixer around neck, adjust the circle for different sizes and fix the nylon strap in the front according to your condition. And the Gas-filling Valve is on your left hand. 2. Fasten the air-releasing screw before hand pumping. 3. Adjust the clutching condition in the lower part of the circle, and the traction angle according to the feeling of patients or the advice of doctors. If the disease is on the right, please strengthen that side by separating from the left side (see picture) 4. Pump with hand until feel good and symptom remiss. After pumped, please put the ball into upper pipe for protecting the hand-pump. 5. The fixing control can be used for a long time, 20-30 minutes for medium and minor traction, and 1~3 minutes for major traction. 6. Usually, the first make the medium and minor traction, then the major traction according to the feeling of patients. A course of 1-2 doses daily for 10-20 days. 7. Must use it under doctor direction during concrete symptoms treatment. 8. After treatment, push back the ball first; exhaust air as natural as possible by gradually relaxing the screws. Do not squeeze the tractor for exhausting. Attention: 1. Use it under the doctor direction, and relax yourself as much as possible during treatment. 2. When abnormal reaction appears during the treatment, exhaust air slowly, adjust angulations and strength until abnormal reaction disappeared, and then try it again. 3. When doing the medium or major traction, you can close the low pressure air-chamber before Pumping is finished so that the upper air chamber could keep soft and patients feel comfortable during treatment. 4. Major traction must be done after 20-30 minutes minor or medium traction. 5. When gas-filling valve appears to return air slowly during pumping air unblocked can be resumed by a wooden toothpick to poke air intake in the bottom of valve. 6. Avoid sharp and hard goods touching tractor or over pumping when used. 7. Avoid infinite pumping when unused. Main technical index: 1. The traction range is 20cm±4cm. 2. The neck traction fixer can bear 80kg weight when the inside air pressure will be 0.023mpa; no leaking occurs in two minutes; when Air-locked Ball is pushed to the linking pipe, no leaking occurs within five minutes in the switch area. 3. The Neck Traction Fixer can bear 60kg weight and there is no distortion when the inside air pressure will reach 0.023mpa. 4. The traction angle and circle sizes can be adjusted by nylon strap. The adjustable range of circle sizes is 28cm~48cm. Store: 1. After treatment, the tractor must be discharged spontaneously, then put it into the package t to prevent form dirt. 2. When the patient dose not use the Neck Traction Fixer for a long time, please stored it with some air in it, which will be helpful for prolonging their life. 3. Stored it far from the sharp and hard goods, fire and high temperature. 4. Keep dry in magnets of DX-C Neck Traction Fixer and store it far from the magnetic materials and items like TV set, watch and so on. Cleaning: 1. Spots on the surface of Neck Traction Fixer must be cleared by soft brush after correct amount pumped. Heavy rubbing and cleared with hard brush should be prohibited. 2. When DX-C Neck Traction Fixer needs a cleaning, the magnets should be refrained from an immersion. Prohibits: 1. Over traction will be prohibited for the new users. 2. The heavy-symptom patients have to use with the strictest advice of doctor. Standard No YZB/京0618-2004 Register No Approval 2005 Jing Yao Jian Xie No 1260092 Invention Patent No 00136101.5 New Practical Patent No 00267552.8 Shape Patent No 00345713.3

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top