AP220 Dispersible Polymer Powder

Quick Detail

Package & Delivery Lead Time

Detailed Description

AP220 is a white fine powder consisting mainly of pure acrylate copolymer resin Main component: pure acrylate copolymer Properties of powder Appearance: white uniform powder Volatile matters: 2% or below Tg: approximately -20℃ Bulk density: approximately 0.5g/mL Average particle size: approximately 100 μm. Properties of emulsion (solid content approximately 50%): Viscosity at 25℃ approximately 2,000 cps or below Brookfield LVT spindle 3, 12rpm pH: 7.0 - 8.0 Application: Powder AP220 is a water redispersible powder which can be used universally to manufacture Polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum Package: 20 kg/bag: valved multi-layer paper sacks with polyethylene interleaf Storage: Powder AP220 must be stored in a cool, dry place To prevent moisture penetration, packs which have been opened should be sealed again as soon as possible On account of thermoplastic behavior of the redispersible powder, sacks must not be stacked higher than one pallet Powder AP220 storage times should not exceed 3 months from date of delivery Industrial safety and environmental protection Risk of explosion by static sparks or ignition sources Use only explosion-proof equipment Use with local exhaust ventilation Wear protective eyeglasses or chemical safety goggles A safety data sheet will be made available on request This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application Any existing industrial property rights must be observed The quality of our products is guaranteed under our general conditions of sale

Basic Company Information

Bosson (Beijing) Chemical Co., Ltd

Company Advantage

Detail Company Introduction