Fischer-Porter Plug-in type electromagnetic flow meter

Quick Detail

Package & Delivery Lead Time

Detailed Description

DIM plug-in electromagnetic flow meter is used to measure conductive liquid which is particularly applicable to large-diameter pipeline measurement, and is widely used in petroleum, chemical, metallurgical, power, paper, food, water treatment and other industries. Model: DIM Series Caliber: DN350 - DN2000 Accuracy: +/- 1.5% of measured values (standard) +/-1.0% of measured values (special) +/- 0.5% of measured values (high precision) The minimum conductivity: 5μs/cm Measuring range: Recommend use of: 0.5m / s ~ 10m / s continuous adjustable The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable Medium temperature: -20- +150oC Environmental temperature: -20- +60oC Fluid pressure: ≤ 1.6MPa Grading Protection: Sensor Converters IP67 IP67 IP68 IP67 Material: probe materials: 304 stainless steel, electrode materials : 316 stainless steel, insulation layer : PTFE Electrical Interface: M20*1.5,1/2” NPT Shows: Standard dual LCD can also showed that the instantaneous and cumulative flow Power: 220VAC 50HZ 24VDC Explosion-proof grade: Exd[ia]iam ll CT5 Signal output: 1, volume can be set to switch: pulse output (maximum 1000 HZ); High / low flow alarm; ATC alarm; Signal flow direction; Fault Alarm; 2, current output :4-20 mA output Configuration mode: 1, through three key scene manual configuration. 2, the scene through remote configuration. 3, a parade through hands-site configuration. Memory: The EEPROM memory will not disappear without batteries preservation.

Basic Company Information

FHC IND. LIMITED

Company Advantage

Detail Company Introduction