GM Tech-2 PRO Kit (CANdi & TIS)

Quick Detail

Package & Delivery Lead Time

Detailed Description

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008 Features: •Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. •Support for on-board diagnostics on all GM systems 1992 thru current year. •Removable hardware modules provide insurance against scan tool obsolescence. •Large, easy-to-read backlit screen. •RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. •Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. •Ability to view the status of vehicle diagnostic tests as they run. Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics. Vetronix Tech 2 Specifications Dimensions 12″×6″×2″ Microprocessor 32 bit, 16 MHz Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications Integral RS232 communication port. Screen 3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once Download Tech2 Brochure ( 5.2 Mb ) GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!): •Tech-2 Flash Tester •32 MB PCMCIA Card with GM OE Applications •CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb ) •GM aftermarket Expertec TIS software on DVD-ROM disks •TIS2000 dongle to access SPS/Security features •Data/Sensor/Trouble Code Manual •DLC Cable, DLC Loopback Adapter •12V Cigarette Lighter Power Cable •SAE 16/19 Adapter •NAO 12/19 Adapter •Battery Power Cable •Storage Case •Tech-2 Users Manual download ( 3.9 Mb ) An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash¡¯s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.

Basic Company Information

Digimotor Limited corporation

Company Advantage

Detail Company Introduction