CNC controller GSK980TDa

Quick Detail

Package & Delivery Lead Time

Detailed Description

GSK980TDa CNC SYSTEM Control function Controlled axis: X, Z, Min. Command unit: 0.001mm Interpolation ways: X, Z axis linear, circular interpolation Programming command range: +-9999.999mm Max. Rapid speed: 7600mm/min 30000mm/min(adaptive) Max. Feed speed: Linear speed 7600mm/min(electric gear ratio 1: 1) Feed per rev: 0.001~500mm/Rev(must equipped with 1024 P/r spindle coder) Feedrate override: 0~150% 16 grades tune real time Rapid override: 25%, 50%, 75%, 100% Acceleration/deceleration mode: The linear rapid acceleration/ deceleration, the index feed acceleration/deceleration, the parameter can be tuned Electric gear ratio: 1~127/1~127 Electronic handwheel function: With Display windows Monitor display type: 320X240 lattice in blue(LCD), CCFL in a poor light Display mode: Chinese(adaptive English menu) Diagram display function: With G function 23 kinds of G command, including 3 single fixed and 7 compound cycle commands, 8 user read/ write macro commands, max. 16 input/6 output points, double subprogram call, user macro program call Thread function Metric/Inch single straight thread, taper thread, metric/inch face thread. And the ending of thread can be set( set by the parameter) Pitch: 0.001~500.000mm(metric) 0.06~254000.000 tooth/inch ( Inch) Spindle coder: 1024p/r incremental coder Compensation function Backlash compensation: (X, Z axis) Pitch error compensation: (X, Z axis)(adaptive) Tool point radius compensation: (X, Z axis)(adaptive) Tool compensation: 16 groups tool length compensation Tool function Adaptive toolpost: Max. Setting 8 tool selections electric toolpost(can adapt 12 tool selections toolpost function, select the near toolpost without chuck/tailstock control function) Tool selection signal input mode: Directly input Tool change mode: MDI/automatic absolute tool change or manual relative tool change, tool selection by forward rotation, clamp by backward rotation Toolsetting mode: Fixed point and trial cutting toolsetting Tool compensation mode: Move the tool/coordinate offset(set by parameter) Spindle control Control mode: 4-gear or analog control Gear control: S1, S2, S3, S4 direct output Analog control: Set as 4-gear spindle auto or manual shifting, and output 0~10V control spindle speed Constant linear cutting function: With( its function is valid when select the spindle analog control) Auxiliary function Control the spindle start/stop, reverse, stop; Coolant On/Off; Lubricate start/stop; Chuck clamp/unclamp; Tailstock feed/retract in Manual/MDI; Control the spindle frequency conversion automatic shifting in MDI/Auto mode Program edit Program capacity: 40KB, 63 programs Subprogram: Can be edited Communication Standard RS232 communication interface; Adaptive communication function and supplying for the communication software and cable, transmitting the program with PC each other Anti-interference ability: Meet GB/T17626.2 Adaptive part Switch power supplying: GSK PB(match with it and have been installed and connected) Driving device: DF3A 3-phase response, DY3B 3-phase compound, DA98 series AC servo Toolpost controller: GSK TB Assembly: Standard panel, big panel, box Integrated outing wire from the bottom/back(matching with DF3A or DY3B) Dimension: 420x260x136mm/ 420x320x136mm(samll/big) Weight: 6.0kg(containing switch power supplying)

Basic Company Information

Gsk CNC Equipment CO., LTD.

Company Advantage

Detail Company Introduction