Curing light

Quick Detail

Package & Delivery Lead Time

Detailed Description

ItemNo: Blue fox 03 No dazzling strong light The LED light is composite resin sensitive blue light, not dazzling, therefore doctors can observe the curing position more clearly, and improve quality of operating. But the Halogen light only has little part which is blue light, and still has much useless non-blue light coming into the light spot even after filtered, which makes the light spot extremely dazzling, therefore you must use light-hiding slide, this will influence doctor observation in operation, And these useless non-blue light can transform into heat energy through resin, make some part turn into high temperature, which may burn dental marrow, and has the bad side effect such as toothache. No noise and no vibration LED hardly generate heat and does not need to dispel the heat with the annoying fan, there are no noise and vibration. To the doctors and patients, especially child patients, it is extremely comfortable. Low maintenance expense LED has a very long life-span (for more than ten thousand hours), but the life-span of general halogen lamp is only about 40-50 hours, with great cost and trouble of replacing a new lamp. The LED has very low power consumption, about 3 watts, but the general halogen lamp takes 75-100 watts. Two-level light intensity design Firstly penetrate with the weak illumination, and then use intensive light for fast solidification. This can suppress resin superficial shrinking too fast, prevent cracking between resin and tooth-hole edge. Large capacity battery Using 750 mAh rechargeable battery, each charge can use more than 60 times X 40 seconds. Technical characteristics • Battery: rechargeable Ni-H battery 4.8V 750 mAh • Spectrum range: 440nm-490nm • Operation time: weak light: 0s-9s(interval 1 second) intense light: 0s-60s (interval 10 seconds) • Turbo light guide: light inlet : ¦Õ 12.8mm ¡À 0.4mm light outlet: ¦Õ 7.6 mm ¡À 0.4mm • Depth of solidifying resin for 40s intense light: no less than 3mm • Automatically shut down time: 3 min ¡À 20s • Power source: AC 220 V (OR 110V) frequency: 50 / 60 Hz

Basic Company Information

Ningbo Rinover Medical Instrument Co., Ltd

Company Advantage

Detail Company Introduction