XB3061 Thermostatic Cooling Adapter For XBOX 360

Quick Detail

Package & Delivery Lead Time

Detailed Description

Thermostatic Cooling Adapter Extend using life and Maintain the reliability for Xbox360 High-Efficiency Snap-on Cooling Device Lower working temperature at least 10°C , extend using life of Xbox360 Auto Temperature Sensor ,cooling fans will be on/off automatically Power from Xbox360 directly , no extra A/C adapter needed Snap-on type , easy to set up and remove Release high temperature rapidly through 2 large cooling fans With Auto / Manual power switch for cooling fans SPECIFICATION : Power : DC 12V , 330 MA Fan : 60 x 60 x 15 mm x 2 pcs Noise Level : 25 Db max. Air Flow : 25 CFM Fan Speed : 4000 rpm Dimension : ( WxLxH) Weight : INSTALLATION 1. Make sure your Xbox360 is turned off and the power cord is disconnected from the outlet. If the console was previously connected to your TV, please temporarily detach the AV plug from the back of the console. 2. Align the thermostatic fan male plug into the Xbo360 power port and guide the upper security pins into the opposing air vent holes( Fig.1- 1). Please do not use excessive force. 3. Gently press the thermostatic fan and console together until the security pins at the top lock into the air vent holes and the edge of the Cooling Adapter is pressed against the back of the console. (Fig.1- 2). 4. Attach the Xbox 360 power cord into the female power port on the Cooling Adapter. (Fig.1-3). 5. Attach the Xbox 360 power adaptor to a power outlet. 6. Attach the Xbox 360 AV cable to the appropriate port on the back. 7. Power up the console first, then slide the ON/OFF switch to “Auto” position of the Cooling Adapter. The fans will automatically start to run when the temperature of the console rise to xx degrees. (Fig.4). 8. The Cooling Fans will not stop when your console is powered off , until the temperature is decreased . REMOVAL 1. Make sure your system is turned off and the power cord is not connected to the outlet. If the console was previously connected to your TV, please temporarily detach the AV plug from the back of the console. 2. Disconnect the box 360 in place, squeeze the top of the Cooling Adapter in order to release the security pins from the console’s air vents (Fig. 2-1). Now hold the Cooling Adapter at the bottom and gently pull it out of the Xbox 360’s power port (Fig. 2-2). Please do not use force, as this may damage both units. Xbox360 is a register trade mark of Microsoft Corporation . This product is not designed , manufactured , sponsored or endorsed by Microsoft

Basic Company Information

Firstsing Co.,Ltd.

Company Advantage

Detail Company Introduction