CGXBJ-2 Electrical conveyor belt repair machine

Quick Detail

Package & Delivery Lead Time

Detailed Description

No.1 Introduction: During the running of conveyor machine, due to certain reasons, such as deviating from the belt, or the own quality of conveyor machine, which makes the broken of both belt-side, and it doesn’t work properly. And the CGXBJ-2 Electrical conveyor belt repair machine can make up or repair the broken edges in a short time (usual 3 hours) after the stopping of conveyor machine, and it doesn’t dismantle the roller. It’s a wide usage comprehensive repairing machine, and its capability and operating methods are the same as the Vulcanizer. No.2 technical parameters: 1. temperature: 145 ℃; 2. Sulfide stress: 0.8 Mpa; 3. Heating board size: 700 × 350 (mm); 4. Power Rating: 3.6 KW No.3 Installation & Usage ① Please repair the broken place by covering with raw rubber. (See also the belt connection by vulcanization techniques in filling rubber part, or our serviceman displays the debugging of equipment.) ② Please put the down-plate, hydraulic pressure plate and down-heating plate under the broken belt place according to the structure sketch map; ③ Please put the up-heating plate, heat-insulation plate up-plate and down-plate, and keep them uniformity; ④ Please install lock shells by the same distance and tighten the screw bolts. ⑤ Please connect the power and electric control box with primary conducting wire, and separately connect up-heating plate and electric control box, down-heating plate and electric control box with the secondary conducting wire. ⑥ Please connect the water pump and hydraulic pressure plate with high-pressure tube, start the electric control box and fill water to the hydraulic pressure plate until the vulcanization pressure.

Basic Company Information

Jiangsu Chenggong Machinery Manufacturing Co., Ltd

Company Advantage

Detail Company Introduction