Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
【Product Introduction】
Xinsu Company has 10 kinds of TH series high-performance catalyst suitable for polyethylene production equipment with Unipol and BP gas phase fluidized bed process. Our products include solid and slurry catalyst, ranging from Ti-Mg series (TH-1 series) of Zieglar-Natta catalyst to organic chromium catalyst, which can meet the requirements of polymerization process at ordinary state, frozen state and super-frozen state, and are applicable for the production of polyethylene products like LLDPE, MDPE and HDPE. Provided with activity during preparation, TH-2 organic chromium series catalyst can be added directly requiring no real time activation, deoxidization and pre-polymerization.
The company has the biggest production plant and relevant auxiliary equipment for polyethylene catalyst by gas phase fluidized bed process with annual capacity of 500 tons. The main equipment with advanced process and reasonable process flow is introduced from USA, Japan, Denmark and Italy.
Now our products have played an important role in domestic market, with large chemical companies in Northeast China, North China, East China and South China as main users. Meanwhile the company is developing rapidly Southeast Asia and Middle East market by right of full product range, excellent quality and strong market service ability.
As the exclusive engineering & research center for polyethylene catalyst in Shandong province, Xinsu Company enhances its technical cooperation with such universities and institutes as Sinopec Petrochemical Research Institute, Tianjin University, East China University of Science and Technology and Qingdao University of Science and Technology, promoting the continuous improvement of product quality, bringing full resource advantages into play, and taking Research Institute of Qilu Branch of Sinopec, pilot test and LLDPE/HDPE equipment of the plastic company as the testing base for catalyst products, to perform the test, pilot test and trial use in large equipment of each batch of products, so as to guarantee the quality.
【Properties】
Catalyst Activity of Catalyst (gPE/gcat，Ordinary State)
Appearance
Application Device
Application & Specialty
TH-1
（Ⅰ）
5000～6000 (resin bulk density: 0.38-0.40 g/cm3)
taupe
powder
Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state.
For the production of polyethylene products like LLDPE, MDPE, HDPE
TH-1
（Ⅱ）
6000～7000
(resin bulk density: 0.36-0.38 g/cm3)
taupe
powder
Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state.
For the production of polyethylene products like LLDPE, MDPE, HDPE
TH-1
（Ⅲ）
7000～10000
(resin bulk density: 0.34-0.36 g/cm3)
taupe
powder
Applied mainly for full density polyethylene equipment with UNIPOL and BP process, at ordinary or super-frozen state.
For the production of polyethylene products like LLDPE, MDPE, HDPE
TH-1L
（A）
Over 18000
slurry
Applied for full density polyethylene equipment with UNIPOL process, operated at high load frozen state. Real time deoxidization is necessary. Different types of resin can be produced by regulating the deoxidization of catalyst.
For the production of polyethylene products like LLDPE, MDPE, HDPE
TH-1L
（B）
Over 30000
slurry
Applied for full density polyethylene equipment with UNIPOL process at non-frozen and frozen state, requiring no real time deoxidization.
For the production of LLDPE, MDPE, HDPE. No carrier contained in catalyst, ash content of resin can be reduced.
TH-2
（A）
4500～6000
pea green
powder
Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.
Producing resin with the melt flow index of 1.4～2.5g/10min, and the density of 0.948～0.955g/cm3, mainly used to mould various containers with a volume bigger than 200 liter.
TH-2
（BⅠ）
4500～6000
pea green
powder
Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.
Producing resin with the melt flow index of 8.0～15g/10min and the density of 0.947～0.953g/cm3, used as special materials for film.
TH-2
（BⅡ）
4500～6000
pea green
powder
Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.
Producing resin with the melt flow index of 8.0～17g/10min and the density of 0.939～0.948g/cm3, used to extrude products. It can be used to produce pipes conforming to PE80 and PE 100 standard.
TH-2
（BⅢ）
4500～6000
pea green
powder
Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.
Producing resin with the melt flow index of 12～21g/10min and the density of 0.949～0.956g/cm3, used to make containers with a volume less than 20 liter.
TH-2
（BⅣ）
4500～6000
pea green
powder
Applied for high density polyethylene equipment with UNIPOL and BP gas phase fluidized bed process.
Producing resin with the melt flow index of 7.0～14g/10min and the density of 0.945～0.952g/cm3, used to make containers with a volume less than 100 liter.
【Main Characteristics and Advantages】
(1) Performance indexes equals the level of similar imported catalyst, and key indexes are better than international level;
(2) Reliable, steady and excellent quality;
Top grade and steady civil project (from Qilu Petrochemical) provides creditable guarantee for high quality of TH series polyethylene catalyst;
Scientific and reasonable process flow, strict and careful process management, unique and strong catalyst equalization ability ensure high quality and stability of TH series polyethylene catalyst.
(3) Advantaged test base ;
with a set of small scale evaluation set,and Qilu Petrochemical pilot-plant, LLDPE/HDPE set for complete evaluation ensure high quality of TH series polyethylene catalyst.
(4) Strong and effective technical service system;
Experienced technical service group and professional team with masterly technology provide technical service for the application of TH series polyethylene catalyst in all aspects at any moment.
(5) Abundant application experience of various petrochemical companies and market advantages
The product is widely used in various domestic polyethylene equipments and its quality has won full recognition from market overseas (e.g. Formasa Plastics Corporation).
Click enlarge Image
