Plastic-wood Making Machine

Quick Detail

Package & Delivery Lead Time

Detailed Description

Ⅰ　Screw feeder 1.Motor power：1.5KW 2.Surface in contact material made of stainless steel Ⅱ　SRL-200/500 Mixer group Hot mixer Cooling mixer 1、Total volume 200L 500L 2、Effective volume 150L 320L 3、Weight per batch ≤65kg ≤100kg 4、Stirring blade 3pc 1pc 5、Rotating speed 475/950r/min 130r/min 6、Lifting control pneumatic pneumatic 7、Heating method electric heating water cooling 8、Drive power YD250M-8/4V1 Y160M-4B3 9、Drive power 30/42KW 11KW 10、Rotating speed 740/1480r/min 1460r/min Ⅲ　Transition hopper 1.Substance：made of stainless steel 2.Volume：300L Ⅳ　Screw feeder 3.Motor power：1.5KW Surface in contact material made of stainless steel Ⅴ　SHJ-60 Parallel Twin Screw Extruder 4.Screw rotating speed：φ60 5.L/D ratio：40：1 6.Motor power：75KW 7.Screw qty：2 8.Capacity：250kg/h Ⅵ　Mould 9.Substance：40Cr 10.Heating process：tempering Ⅶ　Cutter 11.Motor power ：1.1kw，frequency conversion； 12.Cutting blade qty：3pc Ⅷ　Wind blowing and cooling device 13.Motor power：5.5kw 14.Made of stainless steel 15.Pipeline：8m Ⅸ　Cyclone silo 16.Volume：1m3； 17.Made of stainless steel； 18.With filtering device； 19.with cleaning door Ⅺ、SZJ65/132 conical twin screw extruder （1）JZ 65/132 Conical Twin Screw Extruder a.The stuff barrel is made of 38CrMoA1A. It also undergoes the process of nitriding technics. b.The depth for nitriding stem is 0.5—0.6mm，rigidity（HV）800~900， surface roughness rate Ra≤0.8; c.The depth for stuff cylinder is 0.5—0.7mm，rigidity over（HV）950， inner surface roughness Ra≤1.6; d.Gear box adopts driving of hard tooth and inclined tooth surface made by Jiangyin Gear Box Company Ltd，the gear undergoes the cementite process of 20CrMnTi, the gear for distributor box adopts 38CrMoA1A nitriding process, the axle is made of 40Cr material. The pushing bearing for the distributor uses the haerbin bearing, which runs smoothly and stably. e.The power of the main motor is the 37KW. The max production capacity is 120-140kg/h. f.The cooling system for stuff cylinder adopts air cooling, the screw cooling uses cycling oil cooling in the inner bore, and the heater gasket introduce casting aluminum, heating power is 32kw. g.The main motor adopts frequency conversion device which has the function of speed adjusting made by Japan, the main motor voltage is 380V, three-phase, the permitted power ranges ±15%, temperature controller uses the imported one made by Japan RKC, the tolerance ranges ±1℃, the measuring components adopt thermocouple. The low-pressure device is bought from SIMENS with good arrangement of wires, good division color and accuracy tab, which guarantee good quality. h.It equipped with water circle type vacuum exhaust device, the vacuum power is 2.2kw, the vacuum degree is 0.093Mpa. The main machine can be adjusted with the material feeder synchronous, and can be operated separately. The mainframe adopts current over-loading protection device. Ⅻ、Vacuum calibration table 1、Water pump power：4KW 2、Vacuum pump power：5.5KW 3、Mainly made of stainless steel 4、Table position is adjustable XIII　DY-1 Haul off machine 1.Motor power：1.5KW，frequency conversion 2.Haul off speed ：0.4-4m/min 3.Haul off length：1.2m XIV　Cutter 1.Cutting method：plate saw cutting 2.Cutting control method：electric control 3.Cutting motor power：1.5KW XV　Stacker 1.Length：6000mm 2.Discharging method：pneumatic and automatic 3.Signal given method: auto fixed-length cutting

Basic Company Information

Ruian Trustar Machine Co.,Ltd

Company Advantage

Detail Company Introduction