Quick Detail
Place of Origin
HS-CODE
38-
Package & Delivery Lead Time
Detailed Description
Model:W 291639
Soxhlet extraction with reliable automation, and general characteristics of the real target
This system applies to all of the solid - liquid extraction, do not have to worry about trouble in the development of methods, but also provide a great Hello to the procedure for adjusting parameters.
For those who have established and well-known extraction technology, RB90B-811 reservations have four different models that use of extraction, such as:
Standard Soxhlet extraction
Heating Soxhlet extraction
Heat extraction
Continuous extraction
Soxhlet extraction or whether thermal extraction, conversion is not required to install components. Each model can be extracted from the three steps to establish - extraction, washing and drying, all controlled by computer to ensure that the identity of the experimental conditions and the reliability of the results.
System Standard Edition, which is solvent and sample beaker glass tube size. The largest glass tube sample volume of 120 ml and solvent beaker maximum volume of 150 ml. Extraction chamber large enough, can Yongxia 41 x123 mm casing, it is a substitute for glass tube samples.
Sorting
In parallel to each other from 1 to 4 samples between electronic devices controlled by the three stages (extraction, washing, drying) the sort. After the procedure carried out without human intervention, all set at the beginning of the directive has been completed.
Extraction process more rapidly
Extraction of each embedded with two heating sources, coupled with the optimization of heat transfer effects, the use of high boiling point solvents. In addition, the optical sensor and control methods used, so that users can from the standpoint of timing, proceed to the replacement of solvent process optimization, increase the rate of exchange of material (analysis of / solvent), and at the same time saving solvent consumption.
With its higher safety standards, to better protective effects of the operation
Directly to the cooling water, heat and solvent level to watch, when installed shielding enclosures provide special precautions, with a special package of tools to check whether all the joints tight.
Drying samples compatibility
When dealing with thermal sensitivity of the sample, the extract will be concentrated in protected mode, the sensitivity of samples can be carried out under inert gas extraction and drying.
Maintain the purity of samples throughout
Contact with the sample, all the components are inert, so will not happen contaminated samples, and there will not be left in the sealed additives chip.
According to sample size and can be solvent recovery by adjusting the optical sensor way to save the use of solvent.
Integration of the inert gas supply sources to avoid the drying process of extraction of oxidation.
Soxhlet extraction criteria:
Used in many official occasions extraction methods, such as fat measurement.
Analysis from the point of view of the inert device has to meet the remnants of trace analysis and the field of high standards. Contact with the media from all parts of inert materials (glass, PTFE, Fluorez). Cross-risk or no effect of storage!
Large volume sample extraction possible. Extraction Room chamber large enough, can Rongxia 41 x123 mm casing, it is glass samples in vitro alternatives.
In RB90B-811 LSV, can access the information.
One of the main advantages of glass components is easily operable.
Each model can be extracted from the three main steps to establish - extraction, washing and drying, all controlled by computer to ensure that the post-mortem condition can be reused and reliable results.
Soxhlet extraction or whether thermal extraction, conversion is not required to install components. All four extraction of individual self-monitoring and can be individually activated.
As a result of the heating-power components and the best heat transfer programme, the system can handle up to the boiling point of 150 ° C solvents.
Efficient sealing system:
High tightness and high recovery rate.
Continuous monitoring of the process and ensure that the entire extraction process of security.
Soxhlet extraction than the usual maximum of si*times faster.
Rotary evaporator for the most optimal design.
Extraction device RB90B-811 standard technical parameters
Main Power 230 V / V 120
Frequency of 50 Hz / 60 Hz
1250 W power consumption
Extraction of 180 ml
Beaker volume of 150 ml
Body size 690 *290 *980 mm (length *width *height)
Click enlarge Image
