Sell SHURE LX88II Dynamic Wireless System

Quick Detail

Package & Delivery Lead Time

Detailed Description

Features: The LX88-II Wireless System is the finest in its class. This system will give you excellent performance for years to come. SYSTEM CONTENTS The LX88-II Wireless System contains the following components: * One LX88-II dual channel wireless receiver * Two transmitters available in one of three different combinations (see Combinations System below) Combinations * Two antennas * One PS20 (120 Vac) or PS20E (230 Vac) power adapter * One hardware kit * Two rackmount brackets System Combinations The LX88-II system includes one of the following three transmitter combinations: * Two handheld microphone transmitters (includes two swivel adapters and two anti-roll devices) or * Two body-pack transmitters or * One handheld microphone and one body-pack transmitter (includes one swivel adapter and one anti-roll device) Technical Details: * RF Carrier Frequency Range: 169.445 to 221.350 MHz * Working Range: 100 m (approximately 300 ft) under typical conditions. * Audio Frequency Response: 50 to 15,000 Hz, ±2 dB. * Audio Output Level (±15 kHz deviation, 1 kHz tone) * XLR connector (into 600 W load): –20 dBV (mic) * 1/4–inch connector (into 3 kW load): –8.8 dBV (Hi Z) * 1/4 inch connector (into 3 kW load): –18dBV (mix) * Gain Adjustment Range: LX1: 40 dB LX2: 25 dB Impedances LX1 (input): 1 MW LX88-II (output): 600 W (XLR); 5 kW (1/4-inch phone jack) * RF Power Output: LX1, LX2: 50 mW maximum (complies with FCC and IC regulations) * RF Sensitivity: –101 dBm, typical * Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 with respect to pin 3 of low impedance output and tip of high impedance 1/4-inch output. * System Distortion (ref. ±15 kHz deviation, 1 kHz modulation) 0.7% * Power Requirements: LX1, LX2: 9V alkaline battery (Duracell MN1604 recommended). 8.4V Nicad (re- chargeable) are optional but not recommended. LX88-II: 12 Vdc (PS20, 120Vac; PS20E, 230 Vac Power Supply) * Current Drain: LX1: 31 mA average (40 mA max), LX2: 30 mA average (35 mA max) LX88-II: 160 mA average (195 mA max) * Operating Temperature Range: -20°to 50°C (-4°to 122°F). NOTE: Battery characteristics may limit this range. * Overall Dimensions: LX1: 82.6 mm H x 63.5 mm W x 26.2 mm D (31/4 x 21/2 x 11/32 in.) LX2/58: 241 mm L x 50.8 mm Dia. (91/2 x 2 in.) LX88-II: 44 mm H x 349 mm W x 194mm D (1 3/4 x 13 3/4 x 7 5/8 in) * Net Weight: LX1: 79.5 g (2.8 oz) without battery LX2/58: 294.8 g (10.4 oz) without battery LX88-II: 1.7 Kg (3.7 lbs) * Certification: LX1, LX2: Type-accepted under FCC Parts 90 and 74; IC certified under TRC-78 ************* If you are interested in it. Please email me:are_dow@hotmail.com You will get a good price.

Basic Company Information

Aredow Sound Area Co.,Ltd

Company Advantage

Detail Company Introduction