Quick Detail
Place of Origin
HS-CODE
76-
Package & Delivery Lead Time
Detailed Description
Hardware Configuration
Control Box
● Imported industrial control computer main board
● Imported A/D data collection board
● Imported 10.4` real-color LCD screen, clearly show the curves and diagrams.
● 400MHZ Clock frequency
● 128M Main board memory
● 128M electronic hard-disk, can store more than 100 work piece processing information, curves and diagrams for consulting at any time
Equipment Working Environment
● 2.4 equipment should be able to work reliably under conditions below
● Power supply: 220V±10%、50Hz;
●Environmental temperature for the controller: 0~+50℃, for the vibrator: －20~40℃
● Relative humidity: ≤80% （在25℃）
Main functions
一, Stress Relief Modes
Frequency spectrum and harmonic mode, sub-harmonic mode, sub-resonance mode
1. Frequency spectrum and harmonic mode
◆ No special requirements for the positioning of vibrator, the sensor and support point
◆ Analyze the frequency spectrum with no need to scan before processing the work piece
◆ Able to select 5 optimal harmonic peaks for any work piece through computer,; 2 spare harmonic frequencies
◆ Repeatedly select 7 harmonic frequencies with the function key
◆ Five vibration types processing on any work piece
◆ Lagging processing function through acceleration protection
◆ Harmonic frequencies for work piece processing are all below 6000rpm
2. Sub-harmonic Mode
◆ Search for the harmonic frequencies of the work piece through scanning, automatically select the processing frequency, and then auto-control the vibrator to process the work piece through Stress relief.
◆ Find more than 5 harmonic frequencies through scanning, the computer will optimizing the selection of 5 harmonic frequencies, and undertake Stress relief
◆ After processing, scan for the second time automatically, and display the processing result and curve.
◆ The harmonic frequencies for processing the work pieces are all below 6000rpm.
3. Sub-resonance stress relief
Including auto-stress relief, setup stress relief, and manual stress relief
(1) Auto-stress relief
◆ The system , will automatically scan within the set rotating speed rates, and find a resonance peak which meets the processing requirement.
◆ Automatically select an appropriate vibration point within the sub-resonance area and relieve stress according to the feature of the material.
◆ Auto-trace the frequencies
◆ Auto-determine the processing time following the fixed amplitude tech
◆ Record the data change of before and after vibration when the processing is finished, auto stop
(2), Setup stress relief
◆On the basis of frequency spectrum analysis or scanning result
◆User can select any peak to relive the stress.
(3) Manual stress relief
◆User is free to set the rotating speed and conduct VSR at any speed and for any time.
◆This processing way is on the basis of frequency spectrum analysis or scanning result.
二，Files Processing
Can open, delete and print the data files that have been saved.
三，Frequency Spectrum Analysis
Frequency spectrum analysis of the work pieces can be made through pounding vibration method, used as an independent frequency analyzer
四，System Help
This function enables the user to read and check online the function and operation of the equipment
Click enlarge Image
