3.5 Inches LCD Screen Channel Electronic Mineral Blast Vibration Test/SAM-20 Blasting Vibration Monitor

Product descriptions from the supplier

SAM-20 Blasting Vibration Monitor

Introduction

Specification

The L20 blasting vibration monitor satisfies all needs of blasting vibration recording, including mining, pile driving, Tunnel construction, demolition blasting and so on. It is rugged, reliable and very easy to use. You can view peak vibration and frequency immediately on the LCD screen after each event occurs. You can also analyse every blasting vibration event with the computer software.

Authoritative

In order to accuracy measurement data, it has not only CMC logo that can prove test and measurement are legitimacy, but also passed the test by national vibration laboratory.

Portable

You can use it easily for setting, collecting or reading event, because it has LCD, keypad, battery and SD card.

Usability

You can use the waveform recording mode to collect vibration signals without any setting after the boot, then itwil1 record events automatic cycle.

Technical Advantages

1. WIFI connection can realize remote monitoring.

2. All 3 speed sensors in one make cable setting easy.

3. A/D resolution reaches 24 bit, which makes waveform smooth and precise.

4. 8-keytactile keypad drives simple menu operations.

5. Without any setting in automatic mode.

6. Used fully transition away from computer.

Specification

System	24 bit A/D quantization precision1/16777216
Channel	3 channels
Range	Speed:0.0001-35.5cm/s Frequency: 1-500Hz
Accuracy	Precision for acquisition: 5%
Work pattern	Automatic or manual
Record length	1-200 sec or adaptation
Record mode	Continuous
Sample rate	1-50 KHz adjustable
PC interface	WIFI and Rj45
Storage	4G flash
LCD screen	3.5 inches LCD
Clock precision	≤5sec per month
Working temperature	-10°F~ 75°F
Battery	Rechargeable sealed lithium cell, capacityfor24 hours of continuous