New Design Chaff Cutter

New Design Chaff Cutter / Horizontal Hay Chaff Cutter / Silage chaff cutter /Grass Chopper / a New Type of Hay Cutter / Grass shredder cutter / Grass chopping machine

Why cut and knead? 

The machine can improve the utilization and palatability of forage. After processing,the materials will be much shorter and softer,it is more suitable for feeding the animals. 

The materials will be more fully utilized after processing.

What materials are handled? Raw Material details:

Raw Material：All kinds of crops straw,Corn stalk,Wheat stalk,Cotton stalk,rice stalk, Sorghum stalk,peanut stalk,Peanut shell,Crops straw, Sugarcane straw, Hay, Grass, Herbage, Sawdust, Wood shaving,Sweet potatoes etc. Raw materials can be  long ，hard， dry and wet.

End-product requirement: 

The length of End-product can be adjust. The processed materials are suitable for breeding different livestock,like:cattle, sheep, deer, horses, rabbit,etc..

Capacity: 

2 tons, 3tons, 4 tons, 5 tons. It is suitable for feed processing plants, livestock breeding plants, paper mills and other fields.

Product Description

Introduction for chaff cutter:

Small horizontal electric motor animal feed corn straw grass chopper is used for chaff-cut green (dry) corn straw, straw and other crops straw and herbage agricultural livestock machinery.The processed materials are suitable for breeding cattle, sheep, deer, horses, etc., and can also be used for biomass power generation, paper making, ethanol extraction, etc.

Compared with the ordinary chaff cutter machine,this machine adds 4 sets of kneading triangular blades.After the straw cutting,it is crushed by the triangular blades again to make the material finer.It is suitable for feeding different livestock,like:rabbit,sheep,horse,etc.4-6 tons is the best selling style for medium-size farms.

It is a new designed cutter and crusher,which is powdered,cut and crushed at the same time.then is kneaded by the blade.so the hay will be much softer.It is more suitable for feeding the sheep and other animals.

Crushed material is very vast,for example,sawdust,wood shaving,all kinds of crops straw,corn stalk, sorghum stalk, grass, straw,peanut shell,sweet potatoes,and so on.

Forage machine is a kind of more practical straw processing equipment. The equipment can turn corn stalks, wheat stalks, rice stalks, peanut stalks and other crops and pastures into softer filamentary feed through the principles of guillotine, flour, kneading, and rubbing, which improves the utilization and palatability of forage. It has the advantages of stable performance, simple operation, sturdiness and durability, high efficiency, and flexibility. It is suitable for feed processing plants, livestock breeding plants, paper mills and other fields.

Features of hay cutter straw chaff cutter:

1. Wet and dry, more convenient;

2. Stable fuselage, low noise;

3.Fine workmanship and durable;

4. Wide range of side cuts, more practical;

5. Strong power, more efficient.

Custom package :  Usually package : Carton package.

If you want, we can custom Cotton box and Iron box, it needs extra fees.

Shipping: It is recommended to ship by sea or LCL, which will greatly reduce the transportation cost, but it will take longer than air transportation, but it will not affect it. If you need our products, you can plan your time and order in advance.

Installation Instructions :

1. First erect the host with the discharge port facing down.

2. Put the high H-shaped rack into the mainframe and fasten the screws (Note: These 4 screws do not need to be tightened, just take the screws).

3. Then go to the lower frame, same as step 2, do not tighten the screws and put on the nuts.

4. Go up the motor crossbar, go up the lower one first, and fasten the screws, remember not to tighten the screws, just take them well

5. Move the casters up, use cylindrical pins to push the wheels from the outside in, and put them on the frame, and then lock them with cotter pins to prevent the wheels from running out.

6. Right the installed machine and place the machine on a flat ground. At this time, when it is stable, then lock the 8 screws on the main unit and push the machine without shaking.

7. Install the side plate of the conveyor belt, pay attention to the difference between the left and right, don't install it upside down, install according to the picture.

8. Install the conveyor belt unpowered roller, pay attention to put a M10 gasket inside the conveyor belt roller, remember, if it is not put, once the screws are tightened, the conveyor belt roller will not rotate.

9.Upper conveyor belt tightness adjustment screw.

10. Install the conveyor belt feeding platform, fixed with a screw on both sides.

11. Install the conveyor belt feed protection plate, pay attention to the protection plate is placed in the feed roller, align the screw holes, and install the screws.

12. Install the discharge adjustment baffle, which should be as long as cut. There is no need to install it here. The baffle should be lowered, and the punching should be fine, but the speed of the grass should be slow.

13. Install the protective cover on the right side. A double-head screw is needed here. First put it on the host, and then put the nut on the protective cover. Check whether the protective cover is stuck to the drive pulley, and if there is a gap, whether it touches the pulley. But just tighten the screws.

14. Install the motor, pay attention to the rotation of the motor, the machine needs to rotate clockwise, adjust the motor wheel and the spindle pulley to be perpendicular to a horizontal line, pay attention to the belt tightness.

15. Install the protective cover, complete the assembly successfully, clean the inside of the machine, test the rotation of the motor and make sure that the machine is running correctly, then it can be powered on.

16. To install the bucket, put the large partition on the top and the small partition on the bottom. Align the screw holes and fix them with screws.

Company profile:

Hunan Zhongyi Machinery Co.,ltd is one of the professional manufacturers with more than 5,000 square meters plant and we mainly produce Grass Chaff Cutter,Rice Mill Machine,Feed Pellet Machine,and other agricultural chicaneries over 15 years in Zhengzhou,Henan Province,China.

For decades,Zhongyi has already accumulated rich experience on small agricultural machines for various materials which have been widely taken in both domestic and oversea markets. Zhongyi always concentrate on the research and innovation of the agricultural machinery in the past years and keep developing the high quality and user-friendly machines with our own professional R&D experts for various agricultural applications. With our strong sales team and perfect after-sale supports, Zhongyi has been won well reputation and great trust from our customers from all over the world.

After Sales Service:

1.One year warranty except the wearing parts.

2.Detailed English User Manual will be equipped with the machine.

3.Broken parts of the quality problem(except the wearing parts) will be sent free in next order.

4.Timely respond to customer's technical problem.

5.New products update for customer reference.

6.Trade Guarantee:From payment to delivery, we guarantee your trading security without charges.

FAQ

We are a manufacture factory with self-supported export right.

We have been in this field for many years and can supply high quality machine for you.

Q: Could you provide us a better price?

A:Of course, we can provide you with an accurate quotation based on your specific requirement and order volume.

Q: What is the package for goods?