It is intended to determine the melt flow rate of various thermoplastics and resins extruded from a die with a specified length and bore diameter under prescribed conditions
Standards
ASTM D1238,ISO1133, GB3682-2000, JIS-K7210 etc.
Main Parameters
Model | AT-P6003 |
Testing method | MFR, MVR |
Temperature control | RT-300℃, RT-400℃ (optional), RT-500℃(optional) Temperature fluctuation: ±0.5℃ Temperature uniformity: ±1℃ Temperature display resolution: 0.1℃ Temperature recovery time: less than 4 minutes |
Standard die | Φ2.095±0.005mm Length: 8.000mm±0.025mm |
Cylinder | Internal diameter: 9.550mm±0.025mm Length: 152mm± 0.1mm Material: Wear resistance and corrosion resistance Hardness not less than 500(HV5~HV100) |
Piston | Head length: 6.350mm±0.100mm Diameter of head: 9.474mm±0.007mm |
Weight precision | ±0.5% |
Test results | Automatic calculate results and print out |
Material cutting method | Manual and automatic integration |
Position detection | Loop distance from up and down: 30mm Control precision: ± 0.1mm |
Test flow control | Times of cutting of material: 0~10 |
Material cutting interval | 0~999S |
Time display resolution | 0.1S |
Control flow reaches the set temperature without volatility | Barrel temperature time: 15min Material be installed: 1min Material sample temperature recovery time: 4min When binder set: 1min |
Testing Load | 8 grade in total, (8 sets weights) |
Power supply | AC220V±10% 50Hz/60Hz or specify |
Accessories | 1. Main Machine 1 set (built-in mini- printer) 2. Weight (8 sets): 0.325kg, 1.200kg, 2.160kg, 3.800kg, 5.000kg, 10.000kg, 12.000kg, 21.6kg (in the 1st load) 3. Weights tray 1pc (in the 1st load) 4. Piston rod: 1pc (in the 1st load) 5. Standard die: tungsten carbide 6. Material Charging hopper: 1pc (Stainless Steel) 7. Material Charging rod: 1pc 8. Cylinder cleaning rod: 1pc 9. Standard Die cleaning bar 1pc (Stainless Steel) 10. Cleaning Gauze: 2 Rolls 11. Print paper: 2 Rolls |