Battery thermal abuse test chamber is used to conduct moulded case stress test at high temperature, and thermal abuse test.
Test Standards: IEC62133, UL1642, UL2054
Model | AT-L5004 |
Temperature range | RT ~200 ° C |
Temperature display accuracy | ±0.1 °C |
Temperature uniformity | ± 2 ° C |
Temperature accuracy | ±0.5 °C |
Heating rate | (5±2)℃/min (non-linear no-load, adjustable heating rate) |
Inner box size: | 500*600*500 mm (width * height * depth) |
Outer box size: | 850*1200*1000 mm (width*height*deep) |
Temperature Controller | Programmable temperature controller for total temperature rise time control, segmented control program |
Inner box material | SUS#304 first grade stainless steel |
Outer box material | cold rolled steel plate with paint treatment |
Thermal Insulation material | high efficiency compression glass wool |
Observation window | double tempered glass observation window |
Safety protection device | no fuse switch, over temperature protection switch, porcelain fuse, first over temperature alarm |
Smoke Exhaust design | Equipped with exhaust fan and a external duct, easy to connect to high power exhaust system in lab |
Explosion-proof vent design | Located the side of the equipment, surrounded sealed by high-temperature sealing strips, and the insulation layer is made of soft aluminum foil and glass wool. After the pressure relief is completed, the pressure relief vent is automatically .return to original position |
Control formation | automatically turn on the time meter after the temperature reaches the set temperature, cut off the heating power after the time arrives, buzzer prompt |
Temperature cycle | Blower cycle, using high power fan |
explosion-proof door lock | Stainless steel explosion-proof door lock, and added chain lock for secondary protection |
Power supply | AC220V±10﹪,50Hz,,18A |
Power | 4KW |