Amade battery cell crush tester is intended to determine the safety and reliability of batteries or cells after being crushed and deformed in the testing equipment.
Test Standards: IEC62133-2-2017, UN38.3, GB 31241-2014, UL 1642 etc.
Core Parameters
Model | AT-L5001 |
Force applied range | 0~20KN |
Crush speed | 1.5cm/s, the speed range is 0.01~900mm/min adjustable (0.01~1.5cm/second) |
Drive method | Servo motor and driver |
Crush travel | 0~300mm |
Test Space | More than 300X300X300mm (WxDxH) |
Force accuracy | +/- 0.5% |
Crush retention time | 0~9999 Sec adjustable |
Control mode | Professional test software control on the computer |
Battery crush test conditions | During the test, as long as any one of the following conditions is met (whichever comes sooner), the equipment relieve pressure and complete the crush test 1. Applied Crushing force up to (13±0.78)kN 2. The voltage of battery drops by at least 1/3 or 100mV 3. The cell is deformed by 1/10 or 50% of its original thickness. |
Test software feature | 1. With 1 channel of voltage acquisition Voltage acquisition resolution: 5mV Voltage acquisition range: 0~10V 2. The test software with real time monitoring of battery voltage changes, the force applied to battery and deformation of battery 3. Battery temperature acquisition is optional with exact cost |
Test chamber structure | The test chamber is separated from the control cabinet The test chamber door can slide up and down and with door lock and the test area has 2 wire holes, a lighting lamp, an exhaust fan, and a pressure relief port. Crush head size: 15cm diameter crush plate |