100% Nomex Calender Transfer Printing Endless Belt

Blanket imported DuPont aramid 1313, the middle fabric for high-performance industrial silk fabric. It can work under 280°C. After the use, the shrinkage of the door width is 3%, the elongation is 3%, the weight is 3300g/m2, the thickness is 8mm, and can also be customized according to customer's demand. The thickness is 3600g. /m2 is a special blanket for transfer printing of various fabrics, curtain fabrics, and decorative fabrics. Specifications can be customized according to customer needs.

 

Color:White      

Technology:Needled punched

Material:Nomex

Material Feature:Heat Resistant

Thickness:6mm,8mm,10mm

Width:600-3500mm

Length:1800-30000mm

Continual temperature:220℃

Peaking temperature:280℃

Density:2800g/m²-3600g/m²

 

1. 100% nomex raw material

2. The max temperature resistant 280℃

3. Endless type - no joint(Don't worry about the fracture)

4. Misaligned----Our base cloth is use endless industrial  silk. Testing report showed the misaligned rate is about ±3mm.  enclosed our base cloth for your consideration

5. Shrinkage----The base cloth can control the shrinkage rate in 2.5%--3%.

 

That kind of felt belt suitable for transfer printing machine,such as Italy Farah,Rafah,Mantian,Santex,Japan East Valley,Texas691.692,Haining Shrink Machine,Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.

 

1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to

170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,

idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg

according to your needed and start to printing.