Heavy Gauge Slitting Lines

RISHBIN Heavy Gauge Slitters are designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to 2500mm, and speed of up to 60 m/min. It consists of Decoiler with coil car, guiding & pinch device, heavy gauge slitters, dual head/quick tooling change for slitter is available, scrap winder, side-guiding device, looping, tension device, recoiler. Different materials could be suitable to be processed in the line, such as pre painted steel coil, cold rolled steel coil, hot rolled carbon steel coil, stainless steel coil, copper, brass, aluminum and titanium. Here you cna buy high quality slitting machines.

To help you achieve your own production capacity target, RISHBIN Slitter supplies many options, such as high speed slitting, medium speed slitting, etc. All slitters are easy to operate. They are very reliable, steady performers for both short and long terms running productions.

The thickness can range from the thinnest down to 3.0 mm, to the thickest up to 20 mm

Strip Width, from the narrowest 400 mm to the widest 2500 mm

Coils Weight, up to 35 tons

Line Speed, up to 60 m/min.

Minimum Burr on strip.
Automatic Coil Loading
2 complete slitting heads for quick offline tooling changeovers.
Straight edged recoiling.
Economic efficency due to high automation level.
Ease of Operation and Maintenance
Slitting Lines are available in different sizes and models as per the demands and specifications laid by the clients.
It is available in different capacities and standards according to the demand of the clients.
These Slitting Lines are widely appreciated amongst our clients for their user friendly designs and high resistance to temperature variations.

Working procedure:

In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.

Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.

Model No.	RS 3.0-12.0	RS 4.0-16.0	RS 6.0-20.0
Coil Material	CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils
Coil Thickness	3.0～12.0mm	4.0～16.0mm	6.0～20.0mm
Line Speed	0～60m/min	0～50m/min	0-50m/min
Coil Weight	≤30T(35T)	≤30T(35T)	≤30T(35T)
Coil I.D	φ508,φ610,φ760mm	φ508,φ610,φ760mm	φ508,φ610,φ760mm
Coil O.D	≤φ2200mm	≤φ2500mm	≤φ2500mm
Strip Width	≥100mm	≥100mm	≥100mm
Number of Strip	5～20	≤5	≤5
Slitting Accuracy	±1.0mm	±1.0mm	±1.0mm
Blade shaft	Ф320	Ф340mm	Ф360mm
Electrical Control System	PLC Automatic control	PLC Automatic control	PLC Automatic control

Heavy Gauge Slitting Line Specifications

COIL/ROLL DETAILS	Material	HR, CR, SS, GI, PPGI,
	Tensile Strength	δb≤550Mpa，δS≤260Mpa
	Coil/Roll thickness	6-20mm
	Steel Coil/Roll width	600-2500（Max）
	Coil/Roll I.D	Φ500-760 mm
	Coil/Roll O.D	Φ2500mm（Max）
	Steel Coil/Roll Weight	35T（Max）
Slitter parameters	knife pivot diameter	Ф360 mm
	Knife pivot material	40Cr
	Blades specification	Φ360mmXφ360mmX20mm
	Blade material	6CrW2Si
	Max slit quantity	4 pcs (16mm) 8 pcs(8mm)(Customized)
	Width precision	≤±0.05mm/2M
Other parameters	Power	380V/50Hz/3Ph(Customized)
	Line speed	0-60m/min
	Capacity	450 KW
	Whole line Dimension	45m(L)X10m(W)

	Line direction	From right to left(Face to machine)
	Machine color	Blue

Contact

RISHIBN CO., LTD, one of the most professional slitting lines machinery manufacturers from China, which integrated R&D, production, sales and technical service altogether, we provide clients proper slitting machines based on different cutting materials. Welcome your visit.

Company name: RISHBIN CO, LTD.

Company Address: No. 10, Jingshi Rd, Wuxi, China

Phone Number: +86-510-85853379

Mobile/WhatsApp/Wechat: +86-18626315075

Fax Number: +86-510-85853378

E-mail: info@steelslitter.com

Customer Service: service@rishbin.com