The CWDM-SFP10G-40 series optical transceiver is designed for fiber communications application up to 10G, which fully compliant with the specification of SFP+ MSA SFF-8431.This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eight center wavelengths available from 1270nm to 1450nm, with each step 20nm. A guaranteed optical link budget of 14 dB is offered. The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.
Part No. | Data Rate (Gbps) | Wavelength (nm) | TX Power (dBm) | Re Sens. (dBm) | TransmissionDistance | Fiber Type | ConnectorType | Temp. Range | DigitalDiagnostics |
CSFP-10G27-40 | 9.95~11.1G | 1270 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G29-40 | 9.95~11.1G | 1290 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G31-40 | 9.95~11.1G | 1310 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G33-40 | 9.95~11.1G | 1330 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G35-40 | 9.95~11.1G | 1350 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G37-40 | 9.95~11.1G | 1370 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G39-40 | 9.95~11.1G | 1390 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G41-40 | 9.95~11.1G | 1410 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G43-40 | 9.95~11.1G | 1430 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
CSFP-10G45-40 | 9.95~11.1G | 1450 | -2~3 | ﹤-16 | 40km | SMF | LC | 0~70℃ | Yes |
NotesFiber-Mart also provide other 10G CWDM SFP+ transceivers with different transmission distances, like 60km.