1x4 Fiber Polarization Maintaining(PM) PLC Splitter Slow Axis with Plastic ABS Box Package
0 likes
China [CN] 1x4 Fiber Polarization Maintaining(PM) PLC Splitter Slow Axis with Plastic ABS Box Package
Polarization Maintaining Planar Light wave Circuit (PLC) splitter is a type of polarization maintaining optical power management device that is fabricated using silica optical waveguide technology. PM PLC splitter maintains polarization of input optical signal. Polarization maintaining optical splitter is an optical splitter in which the polarization of linearly polarized light waves launched into the fiber is maintained during propagation, with little or no cross−coupling of optical power between the polarization modes.Fiber-Mart offers a large selection of polarization maintaining (PM) 1xN and 2xN optical splitter modules. PM splitters are supplied in configurations with 2, 4, 8 and 16 output channels. PM fibers are bonded to the PLC circuit chips using precision multi-fiber alignment techniques. Our splitter modules feature low insertion loss, low polarization dependence and high polarization extinction ratio over a wide wavelength range.
.png)
| Parameters | Specifications | Unit | Notes |
| ChannelNumber | 1×4 | AccordwithRoHSrequirement | |
| OperationWavelength | 1310 or 1550 | nm | |
| InsertionLoss | ≤7.4 | dB | |
| Uniformity | ≤0.6 | dB | |
| PER | ≥18 | dB | |
| ReturnLoss | ≥50 | dB | |
| Directivity | ≥55 | dB | |
| FiberType | 1310 or 1550nm PM fiber | ||
| PigtailType | Input: PM fiber with 0.9mm or 2.0mm or 3.0mm loose tube | ||
| Output: PM fiber with 0.9mm or 2.0mm or 3.0mm loose tube | |||
| InputLength | ≥1.0 | m | |
| OutputLength | ≥1.0 | m | |
| Connector | None | ||
| FiberMark | Input: white | ||
| Output: blue/orange/green/brown | |||
| PackageDimension | 100(L)×80(W)×10(H) | mm | |
| OperationTemperature | -40~+85 | ℃ | |
| StorageTemperature | -40~+85 | ℃ |
Click enlarge Image