12 Fibers 10G OM3 12 Strands MPO Harness Cable 3.0mm LSZH/Riser
0 likes
China [CN] MTP is the high dense degree of optical fiber pre-connect system,which is generally use in three areas:The Data Center application with high dense degree environmentThe optical fiber to the buildingThe internal connector application in fiber equipment.
Fiber-MART's MTP fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5)standard.It can be widely used for
10G upgrade to 40G/100G data center.
MTP Connector
 |
 |
| MTP Male with Pins | MTP Female without Pins |
| Two other clearly visible features are the noses and guide grooves(keys)on the top side.The Female and Male need to be used together. | |
Pre-terminated MTP Technology-Polarity Type B(Cross)
The application above is for the MTP-LC harness cable connecting a QSFP+port to(4)SFP+ports directly.In many existing DC environments,LC-MTP cables are used to support high density fiber trunks between switches,rack patch panels and main distribution cabling panels(MDA).
For example:
The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series,The other end contains four LC uniboot connectors,which provide connectivity to the SFP+ports on the switch.The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside;thus,fiber 1 and fiber 12 are a duplex pair,as are fiber 2 and fiber 11,etc.
MTP&MPO Difference
The term MTP is a registered trademark of US Conec,which have became the tendency inEurope&Americanfiber communications areas at present.
 |
 |
Assembly Structure Illustration
12-Fiber Mini-Core Cable structure
MTP Hybrid Harnesses Fiber Patch Cables are terminated with MTP connector on one end and other end with LC,FC,SC,ST,or MTRJ connectors to meet a variety of fiber cabling requirements.1.The default diameter of the MTP cable is 3.0mm.2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at sales@fiber-mart.com for other diameter standard.3.Fiber-MART can also custom the pulling eyes,welcome to contact us if you need.
MTP/MPO Machinery&Testing Equipment
| 1 | Our adopt industry's leading high-performance polishing machine,and complemented by precision plates holders designed for MT ferrules. |
| 2 | The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process,the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
| 3 | After the 3D interference detection,the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MPO Termination
| Type | Single mode | Single mode | Multi mode | |||
| (APC polish) | (PC polish) | (PC polish) | ||||
| Fiber count | 8, 12, 24 etc. | 8, 12, 24 etc. | 8, 12, 24 etc. | |||
| Fiber type | G652D, G657A1 etc. | G652D, G657A1 etc. | OM1, OM2, OM3 etc. | |||
| Maximum Insertion Loss | Elite | Standard | Elite | Standard | Elite | Standard |
| Low Loss | Low Loss | Low Loss | ||||
| ≤0.35 dB | ≤0.75 dB | ≤0.35 dB | ≤0.75 dB | ≤0.35dB | ≤0.60dB | |
| Return Loss | ≥60 dB | ≥60 dB | N/A | |||
| Durability | ≥500 times | ≥500 times | ≥500 times | |||
| Operating Temperature | -40 ~ +80 | -40 ~ +80 | -40 ~ +80 | |||
| Test Wavelength | 1310nm | 1310nm | 850nm | |||
Common Termination
| Type | Single mode | Multi mode | |
| (UPC APC polish) | (UPC polish) | ||
| Insertion Loss | ≤0.30dB | ≤0.30dB | |
| Return Loss | ≥55 dB | ≥60 dB | ≥25 dB |
| Durability | ≥1000 times | ≥1000 times | |
| Operating Temperature | -40 ~ +80 | -40 ~ +80 | |
| Test Wavelength | 1310nm | 850nm | |
Note: Maximum Bandwidths of Different Multimode FibersOM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300mOM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500mOM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000mOM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
Make To Order
| Fiber Type | Fiber Standard | Fiber Count | Cable Type | Termination | Cable Length(m) | Breakout Length 1&2(Inches) | Breakout Termination | Polish Type |
| OM4OM3OS1/2OM2OM1 | 12 Fibers | 8~144 Fibers | LSZH BunchLSZH RibbonRiser BunchRiser Ribbon | First Connector:MPO FemaleMPO Male | 1~999 | 12~99(36" is typical) | 3.0mm | UPCAPC |
| 24 Fibers | 24~144 Fibers | Second Connector:LC Duplex/LC SimplexSC Duplex/SC SimplexST Duplex/ST SimplexFC Duplex/FC Simplex | 0.9μm (standard)2.0mm3.0mm |
Note:
Polishing connector (A): PC (multimode), APC 8° (single-mode)
Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)
Furcation length (B): 0.8m
Type of protection connector: IP20
Patch cord Type: Minicore cable, round
Click enlarge Image