Ladder Cover Metal Stud Roll Forming Machine 1.2-2.0mm Thickness Gear Speed

Quick Detail

Package & Delivery Lead Time

Detailed Description

Main Machine Parameters: 1) Number of forming steps: 17 steps 2) Material of shaft: 45# steel hardening and tempering treatment. Outer diameter 85mm ,total solid Tolled shafts 3) Rollers: Material is high grade No.45 forged steel, with digital-controlled procession. The rollers are plated with hard chrome with thickness of 0.05mm on the surface after being machined by the exact machine tool. So that to ensure long life of forming rollers. 4) Main motor power: 7.5 KW with cyclical planetary gear speed reducer 5) The plating chromiums thickness on the surface of rollers: 0.05mm 6) Main stand: 350# H steel welded structure Wall plate thickness: 14mm the main frame of machine is welded separately and the outside wall is connected by screw after being rot blasted on the surface. 7) Chain and gear move the line, motor drives. All working actions are controlled by PLC electric cabinet automatically. 8) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyers requirement) 9) Line working speed (Forming speed): about 15-18 m/min (without cut time) 10) Main machine motor power: about 7.5 KW (Depend on final design) 1. Technical parameters of machine 1.1 Width of material sheet: 70~300mm 1.2 Thickness of material sheet: 1.5~2.5mm 1.3 Material: MS,GI 1.4 Length of the work piece:06000 mm 1.5 Weight of equipment:30T 1.6 Speed of production line:0-5m/min 1.7 Total Power:39KW 2.General structure of equipment 2.1 Area of production line:length 32m x width3.0m x height 3.5m 2.2 Feeding direction: from left side to right side 2.3 Power: 220V, 60Hz, 3 phase 2.4 Pneumatic station pressure 0- 0.7MPa.,0.5m3/min. 2.5 Hydraulic oil: 46# Hydraulic oil 2.6 Gear oil: 18# gear oil 2.7 Equipment Color: Main blue,the drive and safeguard takes red or yellow(warning color) 3.Cable Tray Cover Machine Working Craft Decoiler---Leveler---Punching---Roll Forming---Cutting--Collection 4.Cable Tray Cover Machine Component - - - - NO. | Item | Type and size | Qty. | Power (KW) | Remark | 1 | De-coiler | MT-300 | 1 set | | | 2 | Leveler | HS-300 | 1 set | 3 | | 3 | Servo feeder | NCF300 | 1 set | 2.2 | | 4 | Hydraulic punching | | 1 set | 7.5 | | 5 | Hydraulic punching mould | | 2 sets | | | 6 | Forming machine | GY160 type(by chain) | 1 set | 22 | | 7 | Hydraulic cutting | YQ300X1.2Z | 1 set | 5.5 | | 8 | Run-out table | SL-400X4000 | 1 set | | | 9 | PLC | | 1 set | | | - - - - 5.Cable Tay Cover Picture

Basic Company Information

Jiangyin Bosj Science & Technology Co., Ltd.

Company Advantage

Detail Company Introduction