No |
Item |
Spec |
Remarks |
1 |
Self-check |
2 LED indicators (GSM &GPS status) |
|
Built-in buzzer |
|||
2 |
GPS positioning |
After-event location report |
|
Triggered report type |
|||
Location report while turning |
|||
Receive request for positioning from monitoring centre and then report location information |
|||
3 |
GPRS |
Resume |
|
Multi-centre connection |
|||
Automatic data saving when power cut-off (ACC) |
|||
4 |
Switch state acquisition |
6 routes |
Braking, left turn light, right turn light, light beam, high beam, reserved |
5 |
Alarm switch |
1 route |
Hijack alarm |
6 |
CAN data collection |
2 routes (1 for reservation) |
ISO1939 |
7 |
Local configuration |
Vehicle information can be configured |
ThroughRS232 |
8 |
High accuracy fuel consumption management |
Error 1% |
High accuracy fuel sensor required |
9 |
Driving recording |
GPS speed recording |
|
10 |
Local storage |
Can be saved for 10 years min. |
Storage capacity is32MB |
11 |
Bad driver behavior |
Speed, harsh braking, over-revving, neutral taxiing, excessive idling |
Analysis based on the collected data (customizable) |
12 |
Alarm |
DM failure diagnostics, abnormal vehicle, abnormal battery |
|
13 |
Power source compliance |
Compliant with12V &24V vehicles |
|
14 |
Low battery voltage monitoring |
Low voltage alarm |
|
15 |
Terminal management |
Local software update (RS232) |
|
OTA software upgrade (Remote parameters configuration, SMS setting, remote updates) |
|||
Factory reset (Through RS232 or remote setting) |