Digital Tachograph HQG-3107A

No.

Specification

Remarks

1

Positioning

√

BD/GPS

2

Wireless connectivity

√

GSM

3

RS232

4 channels

FrontDB9 port for debugging and export driving data; 2 channels for camera; 1 channel for Android screen

4

RS485

1 channel

Support extension of other RS485

5

USB port

√

• Export tachograph data
• Charge for external accessories:500mA

6

Printer

√

Built-in thermal printer

7

Display

√

122*32 single-color backlight screen, support human interaction.

8

Driver identity verification

√

Contact IC card

9

AD data acquisition

4 channels

Support external fuel sensor: triple harness (power, signal and GND), powered by the terminal device, error below 1%

10

Pulse collection

2 channels

Acquire vehicle speed & RPM and report to servers

11

Digital signals

16 channels

ABS, brake, front door, ac, heater, high beam,low beam, left turn light, right turn light, etc

12

CAN info collection

2 channels

RPM; torque; accumulated fuel consumption

13

Photo capture

2 channels

Support remote capture and sending back to monitoring centre

14

Text to Speech(TTS)

√

Built-in TTS device

15

One-button call

√

Support one-button call the monitoring centre

16

Charging dock

√

Support charging dock checking

17

Internal battery

√

Support self-powered

18

Hijack alarm

√

Support external hijack alarm button

19

20

Standards compliance

√

Fully compliant with standards ofJT/T 808

 21

Tachograph(3C)

√

Compliant withGB/T 19056-2012

22

Vehicle identity info

√

Support display of plate number, device ID and etc.

23

Remote updates

√

Support remote software updates

24

Remote configuration

√

Support remote parameter configuration

25

English version

Can be customized

26

Bad driving behavior model

√

Speed, collision, fatigue, hard acceleration, hardbraking, idling, neutral taxiing, cold start, etc

27

Long time data storage when power cut

√

Automatically save unsent data if power supply cuts off

28

Protocol

√

Proprietary protocol (compliant with Protocol808)

29

Compression algorithm

√

Support compression algorithm, data can be compressed before sending

30

Timed wake-up

√

When the terminal device is in sleep mode, it would activate automatically every 60 minutes and report the current location.

31

Fuel theft alarm

√

Monitor the fuel level when ACC OFF, if fuel theft happens, device can detect and alarm and report it to the server.

32

Speed limit

√

The highest speed can be set, default 100km/h

33

Remote diagnostics

√

The vehicle failure information can be collected and reported to the back office platform, and then be analyzed.

34

Multi-centre connection

√

The device can be connected to two or more than twomonitoring centres simultaneously, and receive messages sent.

35

Message receiving

√

Can receive messages sent from server, and remind the driver by text and voice.

36

After-event report

√

If cellular not stable or covered, the data will be automatically saved and be reported when the coverage is okay next time.

37

Speed alarm

√

Default alarm speed 100km/h

38

Power cut warning

√

Warning will be triggered if the car battery is cut offwith the device when ACC is at OFF state

39

Updates via USB flash disk

√

Support local software updates via USB port

40

Remote device management

√

Support remote device registration, cancel and configuration,inquiry, restart, factory reset and software update on the monitoring platform.

41

Failure warning

√

When the vehicle failures, two beeps will be heard and failure information can be recorded.